I did not have the color handling set up. I did it and still no lights. I am sure that I am communicating with the dongle. I can see the green LED flashing after I set up the serial port. I will run the manual trouble shooting found in the beginners setup on my board again to see if something has come loose. I am expecting my PICKIT 2 today. Can I flash one of my PIC's with the diagnostics data, use it, and then flash it back to the operational firmware? Every thing works great in my preview. I am an electrician (industrial), but this is driving me crazy! I know I started way late now, but would like to light a pumpkin before Halloween.
I am not using any RGB's or pixels. Simple setup, 18 channels, 3 incandesants to a channel. I have 8 lights hooked up to the outputs just for testing.
I have all my channels patched in the setup display. Please help.
Did you patch the elements to the controller in the setup screen?
Travis
The vixen team doesn't maintain the wiki on this site for 3.1. Last time I checked, there was some info up there, but it's likely way out of date. All of the documentation and videos can be found on the VixenLights.com website.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Yes I did patch the elements to the controller. Should I not use Vixen 3.1.? If I should go with an older version which one? Im trying to get the software downloaded to flash a PIC with the dianogstics to see if I fried the oscillator or U5 or U4. Seems like I got a corrupted disc.
Traneman is trying to help me through pm's. Great guy!!!!

