I must be doing something wrong. I've copied some of the posted zip files and extracted the .pro and .vix files into the profile and sequence folders in Vixen Plus. I open the particular sequence and attach it to the particular profile. The channel lay out appears in the left column but the grid is blank. If that is the usual normal case. I don't get it, where is the advantage in using someone else's sequence if the grid is blank. I also don't see how anyone can use someone else's .vix and .pro files if their display is different from the sequence builder.
Did you change the name of the profile or the sequence. You should not have to re-attache a profile if it is in the right directory,
No I didn't change any names from what they were in the zipped file. But now that you mention it, the .vix name is different from the .pro name.
I will have to go back to where I found the zip file to see what I missed.
If you open you .vix file with a text editor such as notepad++. you will see the following about two thirds of the way through the file:
XLS Christmas 2013 small
The profile listed in this spot for your borrowed sequence that you are loading must be in your profile directory. (XLS Christmas 2013 small) is an example not what you will actually see.
I found it. The files I copied are in FIRECOP252's thread, 2012 Sequences.
After saving and unzipping I copied CHRISTMAS SEREJEVO.vix and CHRISTMAS 2011.pro into the Vixen Plus sequence and profile folders respectively, when I should have copied CHRISTMAS 2012.pro into the profile folder that goes with the CHRISTMAS SEREJEVO.vix
But there was not any music, so my guess is that one has to provide their own music file?
And my next guess is that one would have to setup their display to match the builder's Preview and display in order to use his files?
Not necessarily. I routinely use sections of other people's sequences as part of my display. Most displays will have arches, mini-trees, house outlines, ectetera. I copy these items to my display. Sometimes I copy by section, sometimes I use a mapping tool if I am using the majority of a sequence elements/channels.
