dgirard wrote:If you use EMT, what do you use to join the corners? All the 90 degree EMT fittings I've found have been a bit pricey compared to PVC...or does it fit in the PVC fittings?
Wouldn't waste the extra $ on EMT. My 5 1/2 foot doesn't sag at all. If you're worried put an extra hook in the middle (or however you secure) as you do the two corners or put a T at top and bottom in the middle of the run and add another piece of PVC there to support. Much cheaper and easier than working with EMT in the end
Sent from my SM-G935V using Tapatalk
dgirard wrote:If you use EMT, what do you use to join the corners? All the 90 degree EMT fittings I've found have been a bit pricey compared to PVC...or does it fit in the PVC fittings?
The EMT will slide right in to the PVC fittings, but loosely. I use a small self tapping screw to secure each end.
tonyhight wrote:Wouldn't waste the extra $ on EMT. My 5 1/2 foot doesn't sag at all. If you're worried put an extra hook in the middle (or however you secure) as you do the two corners or put a T at top and bottom in the middle of the run and add another piece of PVC there to support. Much cheaper and easier than working with EMT in the endSent from my SM-G935V using Tapatalk
If you price it out, 1/2" EMT is only about $.50 more than 1/2" PVC. If a couple of bucks breaks you, you are in the wrong hobby. :biggrin2:
And PVC WILL SAG eventually. :omg:
rstehle wrote:If you price it out, 1/2" EMT is only about $.50 more than 1/2" PVC. If a couple of bucks breaks you, you are in the wrong hobby. :biggrin2:
And PVC WILL SAG eventually. :omg:
Very true on the couple bucks 😊. Its working with it that add to PVC just being easier. The ends are what adds to cost. Won't sag if you support correctly. 3/4 inch hasn't sagged on me yet been using for 6 years.
Sent from my SM-G935V using Tapatalk
I use PVC. Here is the bedroom window.

It hangs on 2 hooks, each one at the top of the faux shutters about 2" out from the edge of the window. In this one the frame is all glued.
Sorry, don't have a closeup of the bay window one but you can see it here:

It too is glued. However since its a bay and not a flat window, it is constructed as 3 discreet rectangles (middle and two sides) each glued. I used screw eyes (8 total), two on each corner between the main window and side window rectangles. The two screw eyes are nested with each other to form a hinge. This allows the side frames to hinge backwards to the shape of the window. And, since its larger, they can also fold inwards for storage so its overall size is only the size of the main window plus an inch or so. It too is mounted with only two hooks, one on each face of the side windows at the tip (screwed into the overhang. Like the bedroom window, it simply hangs there like a picture frame.
Placing them out for the season is about a 10 second process consisting of lifting them up, slipping them on the hooks and letting go. The hooks they hang on were pretty close to the size of 1/2" pvc but I opened them up slightly with pliers for a perfect fit before putting the hooks in place. Take down is just as quick. Lift off hooks, carry to garage.
I have not glued mine - I tell myself about once a year that I should glue them, but I don't:) They fit snug, and only seem to pop out when I'm taking them down.
The only reason I glued mine is so that the squares remain flat and don't torque out of shape between garage and hanging on the house. They certainly are not coming apart unless I pull on them. Even their own weight wouldn't make them come apart. But I just didn't want them twisting out of flatness.
tonyhight wrote:Very true on the couple bucks . Its working with it that add to PVC just being easier. The ends are what adds to cost. Won't sag if you support correctly. 3/4 inch hasn't sagged on me yet been using for 6 years.Sent from my SM-G935V using Tapatalk
Yes, 3/4 is more sturdy, and a center support will help for sure. I was talking about 1/2". I use the PVC elbows for all of the joints, even with the EMT.
rstehle wrote:Yes, 3/4 is more sturdy, and a center support will help for sure. I was talking about 1/2". I use the PVC elbows for all of the joints, even with the EMT.
Ya, I was going to do 1/2 but opted for a size up. Do the PVC elbows fit secure with the EMT or do you throw a screw in them?
Sent from my SM-G935V using Tapatalk
rstehle wrote:If you price it out, 1/2" EMT is only about $.50 more than 1/2" PVC. If a couple of bucks breaks you, you are in the wrong hobby. :biggrin2:
And PVC WILL SAG eventually. :omg:
If (when) this happens to mine, my plan for this is to drill a hole in the side of one of the PVC 90's on the top corners of my frames and slide a piece of 1/2" EMT into the top piece of 3/4" PVC then cover up the hole somehow.
