I upgraded this year to FPP 9.3, and haven't run into any issues with the ports. Haven't actually experienced what I described in my earlier response...
I would check your Output Setup/Channel Outputs, under 'Other'. I'm assuming you're using 'Renard' and have selected a Com port. The correct com por...
Which version of FPP are you using? The only thing I can think is that possibly it has something to do with your output settings in the fpp? Since y...
Hmm - the JP1 and JP2 are used to determine how you are receiving data and jp3 is a jumper to run in diagnostic mode. I would expect you need jp2 jum...
Great! Glad you were able to get it working!
One last thought, it’s been a while but I remember having to change the usb port I had my pickit connected to - I’m not actually certain why, maybe th...
For mine (which was pickit3) I had to set it at 4.75V. No idea if that would help here, but perhaps worth a try
Sorry I don’t have a spare pic to drop in, but the front pins on the notch side should go into the slot just at the thick white line where my scribble...
Yours looks just like mine, so it looks like your pic is in the wrong place. You can see on the bottom side picture you sent, the area showing dip8/1...
Very nice - always love a good Star Wars Christmas!
Hmm - I don’t use pickit 2, but since Microchip sees it it seems good. I can’t tell by looking at your adapter how big it is (your pictures are only ...
I historically haven't done much PIC programming, but had to do some this year. I bought a PICkit3 from Amazon, one of the chinese versions not Micro...
I use my home network for the WiFi network, and with that one I can connect to the Pi from a pc inside or from my phone or iPad. I have a separate sh...
For kicks, I went ahead and loaded FPP v9.3 on my spare, it worked like a charm, along with quite a few updates to make life easier (no surprise there...
I went ahead and re-initialized things, took me a few minutes to remember what I was doing since this has worked rock solid for the last few years:) ...
