Adding second break...
 
Notifications
Clear all

Adding second breaker box

24 Posts
16 Users
0 Reactions
11.6 K Views
Posts: 8
(@tex68)
Active Member
Joined: 19 years ago

up grade the main to 200 amps then get a spider box 240volt (temporary power distribution box) u see them at construction sites and events. you can buy more than one and hook them together, and be able to place them in the yard where u need. mine powers more than 3/4 of my lights have 20,000. mine has 6 110 outlets and 1 220 outlet. other configurations are availabe. there about $200, the real money will come from the bologna wire you need. www.cepnow.com


Reply
Elmo2resc
Posts: 265
(@elmo2resc)
Reputable Member
Joined: 19 years ago

Here is what it comes down to. I am a Firefighter that builds homes for a living on my off days. I am not an electrician, but I do deal with city inspections and codes. First off I would check to see what your main panel is rated for. If it is rated for 200amps, don’t put a larger main in that panel. The electric company engineers the drop off what they calculate that homes load to be. I am sure there is room for some upgrade, but you can't put an additional 200amp panel for a total of 400 without dealing with your main panel and meter first. With that said, every area is different in what they require to be permitted. In our area a home owner can pull all their own permits and do all their own work. It has to pass code and you are not supposed to hire outside contractors without notifying the city and having them pull their own permits. I would imagine that most cities if you asked them say you need a permit. I have a 200amp panel. I have a 100amp pool sub panel off of that. The theory is that you are not using all of that power at one time. If you are worried about overloading you could turn certain circuits off while you are running your display so that wont happen. Either way, if you are learning from a book I would have somebody check your work before you turn things on. It could be your house that burns or someone injured if you don't. Just because the circuit doesn't trip doesn't mean it is wired right. I don't know if any of this helped. Jerome


Reply
Posts: 95
(@fcky529)
Estimable Member
Joined: 19 years ago

My main breaker never popped, but it did MELT, i'm guessing it was defective, replaced it and it popped so i had to turn off most things in the house (why would I decrease my lights?)


Reply
NogginBoink
Posts: 482
(@nogginboink)
Honorable Member
Joined: 19 years ago

Good God.... what are you running that draws over 100 amps!?


Reply
Page 3 / 3
Share: