Adding second break...
 
Notifications
Clear all

Adding second breaker box

24 Posts
16 Users
0 Reactions
11.6 K Views
Posts: 196
Topic starter
(@michael)
Reputable Member
Joined: 19 years ago

Now that I was not aware of. I thought you could only have 100 amps total, not per leg. If that is so, then I will not have any problems, because I have already balanced everything out with 8 new 20 amp circuits on a sidecar pannel dedicated for outside lights. Thank you for that information. Let the lights shine!

- Michael


Reply
Posts: 18
 buck
(@buck)
Eminent Member
Joined: 19 years ago

Im an idiot


Reply
RJ
Posts: 673
 RJ
(@rj)
Prominent Member
Joined: 19 years ago

My math doesn't come out quite the same. I am missing something.

.3 amps @ 120 volt per string of 100 lights by my measurements.

if I had 100 amps to play with 100 / .3 = 333.33 string of lights of 100 lights = 33,333 lights. not millions. But I could be wrong.

if you used both 100 amp legs you would handle 666 string but we need to stay at 80% so 666 * .8 = ~ 532 strings of lights with no microwave / tv or dryer.

532 * .3 amps = 159.6 amps and 19,152 watts of lights.
80% of 200 amps = 160 amps

but please don't try it. I like you guys to much to have your houses burning down.


Reply
Posts: 18
 buck
(@buck)
Eminent Member
Joined: 19 years ago

Yea my calculations are wrong.Ill fix it
Too many head injurys and too much fun in the 70s i guess.
Steve


Reply
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 19 years ago

Whoops, I almost messed up big time. I was going to quote RJ and clicked the edit button instead. When I quote, I usually delete everything that's not on topic with my reply... That would have been the meat of his post... 😳 I completely forget the Mods right to edit posts. Man, I'd be wipin' egg off my face fer weeks...

BTW, I was going to agree with RJ's math. When I tried it, my numbers were the same as his. I couldn't figure out how to reproduce the other numbers...
Jeff


Reply
Posts: 18
 buck
(@buck)
Eminent Member
Joined: 19 years ago

You divide apples by oranges . I didn't convert the amps into watts.


Reply
Posts: 1062
 Ronp
(@ronp)
Noble Member
Joined: 20 years ago

Oh great " 😳 Honey could you put 100,000 strings back in the basement" RJ says we cant power them off two outlets


Reply
Posts: 30
(@bsummitt)
Eminent Member
Joined: 19 years ago

Ive been reading all over this site and havent found any poststhat positively say that a homeowner can add a "temp" panel, and how to do it legally. Ive been reading up on codes for installing my system. (The city I live in says that they follow all the rules and codes found in the NEC book for the 2002 edition) I want to run 220 to a seperate temp box and use that box to power my display. My plan was to install another 220 breaker in my main breakerpanel and then run the 220 to my temp box. I went to Lowes today and asked if I could do this and the guy told me "no". He said that I cannot add a breaker to my box under NEC code, since Im not a liscensed electrician. Is this true? If that is true, heres another question. Since I have a 220 breaker not being used already in the breakerpanel(the house had a window ac unit that this was feeding) Can I 'move' the existing romex and wire it into my temp box?

Ive read all the codes about having temp installments for 90 days for holidays, but those dont mention a whole lot. Does anyone know where in the NEC guide (online guide) it mentions who can install a circuit?


Reply
Mudsculpter
Posts: 1218
Admin
(@mudsculpter)
Member
Joined: 19 years ago

There are lots of really good books that detail how to install new breakers or to expand your service if you have room in your box.
But if you have a 220 circuit that is not being used, I dont see why you can't extend that to wherever you need it. I guess what I'm saying is that I'm not a licensed electrician but I am a homeowner who has built a studio under North Carolina building codes. I brought power from my service box (after the meter) to the studio and got it checked off by the inspecter after I finished. Moving an unused 220 circuit to another area of your house should be OK. But always check with your local building code authority to be sure.


Reply
Posts: 22
(@jetmech)
Eminent Member
Joined: 19 years ago

This is from the Mobile County Inspection Office web site:

Residential Building Permits:
If Everything is in Order,
The County Inspection Office Will Issue You:

A building permit for new construction or renovation of your home, or

An electrical permit, allowing an electrician licensed in Mobile County or owner to hook up the power from the utility service point to premises wiring system.

If you are building a new home and have hired a licensed contractor to perform the work. The contractor is required to get the permit.

It's my understanding that here, in my county, the only work that "Requires" a licensed contractor is AC/Mechanical.. everything else can be done by the homeowner. If the homeowner is getting the permit then it is assumed the homeowner is doing the work.
I'm sure this varies by location, and just because it's allowed doesn't mean you should, let common sense and prudence prevail.

John


Reply
Page 2 / 3
Share: