Notifications
Clear all
Jun 10, 2013 8:50 pm
WS2811 WS2812 strip controllers (RS485 DMX Serial)
EDIT: for RS485/DMX version, skip to this post.
I have 2 boards that will make controlling WS2811 based strips a lot easier.
My original plan was to use them for "intelligent" icicles, but now I am also thinking of wearable and other applications.
I can control strips using simple comm protocol rather than dealing with WS2811 protocol.
Individual pixels can be controlled or pre-programmed sequences can be triggered.
Optional memory can store many, many sequences.
Here are the specs:
- 20pin MSP430G2xx3
- 5V power supply
- 0.05" programming header
- UART input (allows pixel or sequence control)
- 11mm wide (0.45")
- 25mm long (1")
- 32mm long (1.25") - version with memory
- optional SOIC SRAM or EEPROM
- 1mm thick
Assembled boards
Board in the sleeve
Board attached to 30 LED strip (0.5m)
23 Replies
Jun 10, 2013 9:06 pm
Wow -- very nice indeed!
Jun 10, 2013 9:15 pm
Niiiice...
Jun 10, 2013 9:42 pm
Very, very cool stuff. :thup:
Jun 11, 2013 1:54 am
You could use those for RGB candy canes.
Page 1 / 5
Next




