critic2 wrote:I purchased some of your samples yesterday. Just waiting on your boards.
Do you need assembled or bare boards? If bare, I can send one to you.
RobG wrote:Do you need assembled or bare boards? If bare, I can send one to you.
Both I suppose. I have not tried the SMD soldering yet, albeit I want too.
Thanks for the offer!
I will soon have several of those controllers available.
Features:
- DMX to WS2812B/WS2812 pixel strip converter
- Up to 120 RGB LEDs per controller
- Programmable start channel and length
- Basic firmware (3 channels per LED)
- Firmware can be updated with the cheapest LaunchPad
To program start channel and length, connect single strip controller to DMX controller and send the following sequence: 0x04 (start byte,) 0x03, 0x00, 0x02, 0x08, 0x01, 0x02, [start channel MSB], [start channel LSB], [length].
RobG wrote:I will soon have several of those controllers available.
Features:
- DMX to WS2812B/WS2812 pixel strip converter
- Up to 120 RGB LEDs per controller
- Programmable start channel and length
- Basic firmware (3 channels per LED)
- Firmware can be updated with the cheapest LaunchPad
To program start channel and length, connect single strip controller to DMX controller and send the following sequence: 0x04 (start byte,) 0x03, 0x00, 0x02, 0x08, 0x01, 0x02, [start channel MSB], [start channel LSB], [length].
Nice Rob!
This might be exactly what I need for my icicle project. Let us know when these are for sale. I really like the idea of using DMX because of the cable distance limitation of communicating directly with the pixel protocol.
