WS2811 pixel compat...
 
Notifications
Clear all

WS2811 pixel compatibility

26 Posts
9 Users
0 Reactions
65.4 K Views
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Great news Jim , will the dithering to achieve 8-bit dimming with the 6803 pixels be auto set when 6803 is selected as pixel type ?


Reply
Posts: 1249
Topic starter
(@jstjohnz)
Noble Member
Joined: 17 years ago

Yes, right now it happens automatically as long as the string length is 55 or less. Longer than that and the flickering from the dithering becomes visible, so dithering is turned off for longer strings. At some point I may make it a configuration option.


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago

Jim,
when I load 2.025 I an unable to get to the web page. Before I get the Laptop out, does the new firmware changed the stored Static IP ADdress? When I re-load the 2.023 firmware, My old static IP address works again.
Matt


Reply
Posts: 1249
Topic starter
(@jstjohnz)
Noble Member
Joined: 17 years ago

No the configuration should not change. Make sure you load the correct one for your hardware (E680 or E681).


Reply
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago
jstjohnz wrote:Make sure you load the correct one for your hardware (E680 or E681).

That is embarassing. All fixed.


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago
jstjohnz wrote:The .eeprom file I believe is a byte-for-byte image of what's to be written to the first 32KB of the eeprom. The file, therefore, is exactly 32K bytes long. I should have the utility available for download soon that allows you to send the .eeprom file to the controller via the lan connection, so no programmer required when doing it that way.

I have a pre-down-the-wire prom that I have to update to even be able to even do the down the wire update.


Reply
Page 3 / 3
Share: