I have had this $20 router for years, maybe it's time for an upgrade. If I'm going to use espixelstick in multicast.
Sent from my SM-G950U using Tapatalk
ider. i use a separate ssid and password, keeping everything off the network so i forget to think about them.
....and just in case anyone's doing it, 2 SSIDs on one AP doesn't help the WiFi performance, only the access control. You only want a single SSID on the AP doing multicast sACN.
on a separate ap.
MartinMueller2003 wrote:on a separate ap.
I was pretty sure you knew better. That was intended mostly for others who may not be so savvy.
It seems like people are really going for the Ubiquity EdgeRouter and either of the 2 Ubiquity access points, I'm curious why those are the gold standard? I've seen some people comment on not be able to sustain the connections/lackluster support for multicast with dd-wrt, etc.
Secondly, is the PI taxed that it cant function as the EdgeRouter? Why use such a "high-end" device for what I perceive to be not requiring that. Am I underestimating the demands of the light show?
The PI is a linux device and can be set up as a router and or an AP and a few other things. As a show player, if it is running a few hundred pixels via an external controller, then it may have time to be the AP. When you start getting to thousands of pixels, you may start having lag issues. It is better to not try to cram too much functionality into a single point of failure. This is electronic hardware. Things go wrong. Want to have a PI be your AP? Set up a seperate pi to do it. For me, I use an EDI-Max AP / router on my roof to drive my show. It has dual radios so I use the other radio to attach to my home network. My show is on a wired network attached to the EDI so show traffic does not get forwarded to my house network and I can still access the device web pages when needed and attach my tablet to the wireless network to test the elements
Also important to note regarding the Pi as a router is that the Pi isn't the best choice because it's Ethernet port will never run at full speed because it's actually a USB device.
The edgerouter isn't a "high end" device. At $50, the ER-X is a very inexpensive little router that can be configured to do almost anything you'd need for a small network. You don't need any of the functionality of a router for the show stuff to work. You're not routing anything afterall. You may want a DHCP server, but in the case of the ubiquiti airmax stuff, the AP itself can actually do that.
