Weird AlphaPix16 pr...
 
Notifications
Clear all

Weird AlphaPix16 problem - need HELP!

38 Posts
5 Users
0 Reactions
6,450 Views
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Those are mainly tweaks for corner cases. You need to work out the network issue. Does the Alphapix have an Ethernet interface? Can you connect directly to it using a laptop or computer (get the router out of the equation)?


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

Yes, it's ethernet only, no DMX or any other inputs.
I just tried direct connecting via a dumb switch (already had it sitting here) and got nothing, so I tried pinging it from a command line and got no responses. I've never done direct IP connections so have no experience with this. I used the switch so I wouldn't have to try finding a null cable (not sure if I needed that but the switch is dumb anyway so shouldn't be an issue).


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

did you set a static ip on the pc on the same subnet as the controller?


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

Just did an ipconfig on the CLI and discovered when I unplugged the computer from the router it reassigned a new IP address, so set the AlphaPix in the same subnet and also changed the subnet mask to the same as in the ipconfig info. Got ping returns now, but still no browser UI (with the new IP address) and still no blinky pixels when running the sequence.
I also just found the section in the vixen docs that talk specifically about multicast and unicast. It mentions that some early model pixel controllers had problems with parts of multicast (IGMP?)... I'm not sure if this AlphaPix falls within that early model group but maybe so. It also appears that there are a number of home network routers that dont handle multicast, especially with WIFI. I'm researching whether any of my routers and my AP (TP-Link EAP225) will handle multicast.
Still, even with all of that, it seems like I should be able to get into the browser UI with the AlphaPix's IP address, whether things are set to multicast or unicast in vixen. I'm beginning to wonder if the AlphaPix is defective.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

it may be, but the default IP in a windows PC is a 169.x.x.x address which is special code for "not useable". Set them both to 192.168.1.x values. Yes I suspect your controller may need a sw upgrade and a reset to factory defaults


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

I went back and started over... Disconnected everything but the single cable going between the AlphaPix and the PC, set the AlphaPix to its default static IP (192.168.0.50), set the PC to 192.168.0.1, got good ping returns. So with that I tried getting to the AlphaPix browser UI again... still no access and no blinking lights from Vixen. So that eliminates the router as being a cause. I'm engaged with Holiday Coro again regarding the AlphaPix so we'll see where that leads. I can't do any firmware uploading without the browser interface so gotta get that working before I can progress I think.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Yup. Remove all of the variables and you can spot the issue. The AlphaPix is not behaving.


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

UPDATE - Some progress... I was finally able to get to the browser user interface! The PDF is the config page from my AlphaPix. I double checked it against the Vixen channel mapping to my 12-string pixel megatree in the preview and it matches up perfectly.
I had disabled all of the windows firewall and antivirus previously to no avail. Totally forgot about the Kaspersky antivirus that was running. Once I realized I had overlooked this I shut it down and tried the IP address for the AlphaPix and the UI popped up!

Unfortunately I still get no output to the 50-pixel string I have connected to port 1 (nothing connected to the rest of the ports currently) when I run the test sequence so still need help/ideas to figure that out. I wonder if there is some obscure network setting I need to do?


Reply
OptykMuse
Posts: 181
Topic starter
(@optykmuse)
Estimable Member
Joined: 15 years ago

New day, more troubleshooting...
No blinky lights still. I've disabled both the windows firewall and the AV software so am at the point I was last night where I can bring up the Alphapix configuration UI in the browser.
Before starting Vixen I see there is no activity on the Alphapix ethernet jack's 'data' LED. Soon as i start Vixen I see the data LED going like mad, so it appears something is being sent there from Vixen. I have a test 'show' running which starts as soon as I start Vixen software, so it should be sending the megatree data. I've compared the universe/channel setup of the alphapix ports with what is shown in the Vixen sACN controller and see that they look correct. BTW, I have each of 12 alphapix ports set up to connect to a single 50-pixel string for the 12-string megatree.
I've been going back and forth with HolidayCoro tech support answering questions and providing config pics and info and they have come to the conclusion that the problem is a Vixen configuration issue, although I don't yet understand what it might be. They don't have much Vixen knowledge, being familiar only with XLights so this is as far as they are willing to go without progressing to paid tech support. Unfortunately, the price of and hour of their tech support would pretty much pay for a new pixel controller anybody have a 12+ port pixel controller for sale?), so I'm on my own with this problem now, or will need to consider a different approach or obtain another (different) pixel controller in short order.
Back to head-scratching and asking for thoughts and ideas...


Reply
Posts: 429
(@mikekrebs)
Reputable Member
Joined: 12 years ago

Test mode still not working?

What is voltage on the output port?

The alphapix I have has "output chips". I blew one up somehow one time and it took forever for me to realize that ports x-x were all connected to the same chip. Have you moved the pixels to port 6 or 12?


Reply
Page 2 / 4
Share: