Trouble shooting E6...
 
Notifications
Clear all

Trouble shooting E682

24 Posts
9 Users
0 Reactions
6,335 Views
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

The other thing I'm seeing is that your universe numbers duplicate. Try clearing out those extra ones at the end in the unicast section. I haven't used these more recent versions of the firmware with this newer UI, so I'm not sure how it works under the hood. But I bet there might be a conflict in assigning strings to their proper pointers in the data buffer. Set those last 4 universe numbers to 0 if it allows it. if it doesn't allow it, set them to unique numbers, any unused universe would work, but I'd set them way out of range like 10001-10004 so it's obvious. After changing them, double check your universe drop downs to make sure they're using the correct universe number.


Reply
Posts: 482
(@jcmarksafb)
Honorable Member
Joined: 15 years ago

Your universes are all messed up to begin with you start with universe 7 with 2 strings of 118 which takes you to universe 9 that's cluster 1. Then you start cluster 2 at universe 8 right there it won't work. Cluster 2 has to start at universe 10 or at the very least universe 9 but I would start cluster 2 at universe 10. You do need to switch to unicast so you have all 12 universes available ..... you need to start over and straighten out your universes before being able to correct your color problems.


Reply
Posts: 686
Topic starter
(@traneman)
Prominent Member
Joined: 16 years ago

ok Thank you


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago
jcmarksafb wrote:Your universes are all messed up to begin with you start with universe 7 with 2 strings of 118 which takes you to universe 9 that's cluster 1. Then you start cluster 2 at universe 8 right there it won't work. Cluster 2 has to start at universe 10 or at the very least universe 9 but I would start cluster 2 at universe 10. You do need to switch to unicast so you have all 12 universes available ..... you need to start over and straighten out your universes before being able to correct your color problems.

his config only needs 2136 channels, he only needs a bit over 5 universes. Multicast would work just fine here.

You can have more than one cluster working on the same address space. (that's why the setup screen actually allows it) His first two strings are 118 pixels, but the third is only 44 pixels. So since he's not using the last channels of the first cluster he can back up the start of that next cluster to next available channel. (since the last string in cluster 1 is shorter than the first ones.) So there's no reason to send null data on those channels. He can just start there for his second cluster. I do this all the time.


Reply
Page 3 / 3
Share: