Notifications
Clear all

E682

10 Posts
6 Users
0 Reactions
3,334 Views
THurrle
Posts: 1211
Topic starter
(@thurrle)
Noble Member
Joined: 17 years ago
[#32418]

Finished mounting my E682 n an enclosure and wired up ready to go. Just waiting for the strips from James to set the tree up.
I got the idea on wiring this from Bill S aka Electrified up in Canada for this wiring set up. I want to thank him for sharing the picture.
Terry

682

9 Replies
james70818
Posts: 2045
(@james70818)
Noble Member
Joined: 19 years ago

Way to call a brother out! 🙂


Reply
THurrle
Posts: 1211
Topic starter
(@thurrle)
Noble Member
Joined: 17 years ago
james70818 wrote:Way to call a brother out! 🙂

Give credit to those who help us in this hobby. Hope you have these strips next year. I am going to do a matrix and they might just be the answer I have been looking for.
Terry


Reply
james70818
Posts: 2045
(@james70818)
Noble Member
Joined: 19 years ago
THurrle wrote:Give credit to those who help us in this hobby. Hope you have these strips next year. I am going to do a matrix and they might just be the answer I have been looking for.
Terry

Working on another solution for matrix!


Reply
navyav8tr
Posts: 229
(@navyav8tr)
Reputable Member
Joined: 13 years ago
THurrle wrote:Finished mounting my E682 n an enclosure and wired up ready to go. Just waiting for the strips from James to set the tree up.
I got the idea on wiring this from Bill S aka Electrified up in Canada for this wiring set up. I want to thank him for sharing the picture.
Terry

Can you explain the blue distribution block(?), if that is what it in fact is, and how you have the wiring setup?


Reply
Posts: 187
(@qbert-pns)
Reputable Member
Joined: 13 years ago

Nice Work.
Is/are your power supply(ies) located in the same enclosure?


Reply
Electrified3
Posts: 716
(@electrified3)
Prominent Member
Joined: 13 years ago

Terry's set up required 2 power supplies, so it is much easier to mount them in their own enclosure and keep the other one just as control wiring, cleaner, easier to work with.

Terry is running a mega tree and has 100 pixels per output on his tree and running 5vdc so will need to do power injection. He also has a few props 35' away that will need heavier gauge wire to run them to minimize the need for null pixels.

He is running his outputs from the controller to industrial terminal blocks at the bottom. By doing this if he needs to add in power injection he can easilly slide a second wire in if necessary instead of trying to jam a second one in on the controller connection. Also, his long runs can be run using up to #12 AWG going to the terminal blocks, the ones he used are rated up to #12 AWG.

Some benefits, clean install, easy to trouble shoot, not a rats nest when you open up the control enclosure. Also, being secured to terminal blocks, if a cable is tugged it will be held secure by the terminals rather than pull on the controller connector, which is not so sturdy.

Great Job Terry. Can't wait to see it lit up!


Reply
Posts: 1120
(@4586shaggy)
Noble Member
Joined: 14 years ago

link to blocks? looks like something from mouser... just too busy to do a search for it right now :-p


Reply
THurrle
Posts: 1211
Topic starter
(@thurrle)
Noble Member
Joined: 17 years ago
4586shaggy wrote:link to blocks? looks like something from mouser... just too busy to do a search for it right now :-p

Ebay.
http://www.ebay.com/itm/121388952831?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

This seller is out but there are others. I picked up 80 of them. about 50 cents each. Then I found a great deal on some din rail. I got 9 lengths for what most sellers were wanting for one length.
Terry


Reply
THurrle
Posts: 1211
Topic starter
(@thurrle)
Noble Member
Joined: 17 years ago
Electrified3 wrote:Terry's set up required 2 power supplies, so it is much easier to mount them in their own enclosure and keep the other one just as control wiring, cleaner, easier to work with.

Terry is running a mega tree and has 100 pixels per output on his tree and running 5vdc so will need to do power injection. He also has a few props 35' away that will need heavier gauge wire to run them to minimize the need for null pixels.

He is running his outputs from the controller to industrial terminal blocks at the bottom. By doing this if he needs to add in power injection he can easilly slide a second wire in if necessary instead of trying to jam a second one in on the controller connection. Also, his long runs can be run using up to #12 AWG going to the terminal blocks, the ones he used are rated up to #12 AWG.

Some benefits, clean install, easy to trouble shoot, not a rats nest when you open up the control enclosure. Also, being secured to terminal blocks, if a cable is tugged it will be held secure by the terminals rather than pull on the controller connector, which is not so sturdy.

Great Job Terry. Can't wait to see it lit up!

Thanks Bill. You were the one who helped get me up and running for sure.


Reply
Share: