Testing pixel stick...
 
Notifications
Clear all

Testing pixel stick controller using xlights output to pixel

9 Posts
3 Users
0 Reactions
3,734 Views
Posts: 1115
Topic starter
(@11bravo)
Noble Member
Joined: 14 years ago
MikeKrebs wrote:after you run the sequence check the webpage of the pixelstick for status. Errors?

4 errors first run
5 errors second run


Reply
Posts: 1115
Topic starter
(@11bravo)
Noble Member
Joined: 14 years ago

I put the tiny pop in another room at least 20' away, and got the same delay.
Have a great Thanks Giving Day


Reply
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

Try a different Wireless access point/router, sounds like yours may be having issues. If the ESP firmware test is fine then the controller is OK, sounds like something in the WiFi is slowing down the data transmission,


Reply
Posts: 1115
Topic starter
(@11bravo)
Noble Member
Joined: 14 years ago
Ruppro wrote:Try a different Wireless access point/router, sounds like yours may be having issues. If the ESP firmware test is fine then the controller is OK, sounds like something in the WiFi is slowing down the data transmission,

I have already done that. No change,
I might try another computer. If there isn't any success with that then the only other alternative is to move on and forget this and work toward making use of the E682 and E6804 that I have. Just about out of time for getting a show going.


Reply
Page 2 / 2
Share: