Timon, Thanks for all of that info! I have sent an email to Ray directly now trying to coordinate the replacements. I am getting the 2811s but not sure if new or old design. I have not received a return email yet. Mine will have to be custom made since my spacing was different. Not sure that I want to be the guinea pig on a new style, but if it is better I am all for it. In all honesty I have given up on this year for that part of my display. I took hours of work to zip tie each node onto the banding. I am going live on Sunday and there is NO WAY the weather is going to hold out for me that long.
That is all great information! Thank you! If you talk to him do you mind asking him about mine? What type? He is really slow to respond to me.
kevr wrote:Very nice, I wish New Zealand was a few thousand km's closer but I'm gunna have to get some next year.Kev
Hey Kev,
I'm wanting to get into RGB next year too. If you want to go halves on shipping, I'd be keen.
Frank
Only because we don't know what led dice that they will be using in the package. They may be the same dice as what's in the WS2812B or ones used on the 8mm LEDs. Still waiting for a data sheet.
Your right about the brightness between 8mm and a 5050 chip is based on beam width.
The newer PCB is basically the same except for some resistor changes.
Zeph wrote:Thanks for the extensive report, Timon.There was one part I was uncertain about, tho.
"This is a 8mm RGB LED with a built in WS2811. This will be much like the WS2812B and hopefully just as bright."
I'm not understanding why we would expect an 8mm pixel with 2811 controller integrated with the LED would be any brighter than an 8mm pixel with separate 2811 IC (both at the same voltage of course).
I am aware of two main ways to make a single-LED-per-color pixel "brighter". (1) You can get more total light output by putting more current through it (eg: most 5v pixels run 48, 55, or 60ma while most 12v pixels seem to run around 30ma, so the former may put out more light). For 12V pixels the current limit is probably going to be power dissipation, and I'm guessing that an 8mm straw hat is not going to have better dissipation than an 8mm straw hat plus a SMD LED on a PCB - perhaps less.
(2) Or you can focus the light into a smaller region; for the same total light output, a 5050 form factor LED will likely be visually brighter head on (and less bright from the side) compared to an 8mm LED. But we are talking about 8mm vs 8mm here.
And I'm guessing from outside, not in touch with the production designs at the level you are. Is there another factor I'm not considering?
Timon..how do we know the difference? ..the bags mine came in said 2811..so I assume thats what they are
That's great to hear but is mostly what I've come to expect from Ray. He sticks behind what he sells unlike a lot of vendors on Aliexpress. Heck, I bought one string of regular LED Xmas lights from another vendor on Aliexpress that were clearly listed as 110v, AC strings. When they arrived they were wired up for 220v using some special wal wart with European plugs. That vendor wouldn't take them back, disputed my rejection of them and I had to get Aliexpress to refund my money after submitting pics showing I was sold something not close to what I had bought. Ray is still the best vendor on Aliexpress that I've ever dealt with.
timon wrote: Ray has had a lot of problems with the TM1804's and he's going to be replacing them. I supect all of the replacements will be the WS2811 version which don't have the high failure rate. Knowing how many are out there it's costing Ray a fair number of bucks but he's wanting to do right by his customers.
