What enclosures can be used.
I would suspect a solder blob or a stray wire at the pads. These boards aren't crazy complicated. I get my magnifying glasses on when soldering thou...
Few questions as I've just updated to the latest 5.xx version. What is the timing everyone is using. I have a star on my tree with 90 pixels, 12 foo...
Stampedeboss, I tested all of the other boards for the problem I had with ground. The only board that had the issue was that particular board. I've ...
Anyone have a bead on housings for these now? The housings I have, I have to bend the reflector on one side so it fits...
In the past I did all the soldering for these boards and set them aside. I tried to use one inline with some other pixels but it caused issues downst...
I did this one year as well. You can buy a small lipo battery from hobbyking.com. I'd love to see your line setup...I fought mine all October
Just use my original design and use 1-1/4 inch PVC. Paint it black and viola
There's a UPC code on a photo above... Sent from my SM-G930T using Tapatalk
Dvc...i am more than happy to give you the 3D file. I've been tied up at work and just haven't been lurking much. Sent from my SM-G930T using Tapata...
Fun sponge.... Sent from my SM-G930T using Tapatalk
Fiberglass or metal? Sent from my SM-G930T using Tapatalk
Building one of these when the lights go live. I already have the rails cut and all of the parts....just didn't have time to put it together and dial...
3/4" plywood and eye bolts. That's how I made mine. I attached a 1-1/4" flange on the bottom so the topper just screws onto my pipe.
