Notifications
Clear all
Nov 14, 2016 10:15 pm
This is my first year using the Boyosco Mega Tree equipment and have a question.
How are you connecting your Boyosco pixel strips to the Mega Tree topper? I'm using the 3" spaced pixel strips if it makes any difference.
Thanks,
Craig
62 Replies
Nov 14, 2016 10:23 pm
Simple zip ties 🙂
Nov 14, 2016 10:34 pm
Modified my boscoyo topper with 5/16" x 3" j bolts, using misr clips at the ends of the strips, slips over the jbolts. I also added (2) 5/16" x 3" eye bolts at the rear for guy wires to help hold the tree and counter the tension on the topper. As well as a floor flange to screw the topper to my pole.
Nov 15, 2016 10:04 am
3/4" plywood and eye bolts. That's how I made mine. I attached a 1-1/4" flange on the bottom so the topper just screws onto my pipe.
Page 1 / 13
Next



