Roofline Mounting
 
Notifications
Clear all

Roofline Mounting

14 Posts
10 Users
0 Reactions
6,076 Views
Posts: 299
Topic starter
(@dcamron)
Reputable Member
Joined: 10 years ago
[#46097]

Simple things are hard when you give them too much thought.

I want to mount PVC pipe to my dormers and gutters. On the PVC I want to drape garland, red, green and white lights. I also want to attach pixabulbs directly to the PVC (probably zip ties). My question is how would you approach mounting the PVC to a 45 degree roof line? I think it's going to be heavy and plastic roof clips will slide. I've toyed with the idea of sitting something over the peak, like a 90 degree piece of steel, letting it hang over and mounting PVC to it. Also something like a clamp that goes over the roof and under the soffit. I really don't want to punch holes in the nice the aluminum that wraps the fascia. I'm might consider doing just that if I can punch just a couple of holes and put a threaded insert into it. After Christmas I could remove bolts holding the PVC and insert a plastic cover to hide it. What would you do?

RoofLine

13 Replies
kwoodard
Posts: 281
(@kwoodard)
Reputable Member
Joined: 13 years ago

I know that putting holes in the aluminum is not the ideal solution, but you might consider using something like this: http://www.holidaycoro.com/Half-Inch-Lexan-Pipe-Mounting-Clip-p/770.htm . I'm going to give them a try this year and see how they work.


Reply
Posts: 357
Guest
(@jerry72)
Member
Joined: 13 years ago

For your peaks, i am sure you could use them some how. https://www.cannysystems.com/


Reply
AuburnLights
Posts: 213
(@auburnlights)
Estimable Member
Joined: 12 years ago

I am going to try this...

from here about 3/4 of the way down the page


Reply
Posts: 2048
(@scootchu)
Noble Member
Joined: 17 years ago

For your gutters and gable ends I did this. Simple strapping from Home Depot. Doesn't rust, stays in place and slides under shingles.

13063389 1785109841720712 6463645821274733771 o

12622508 1751712068393823 3529575462731504813 o

12622072 1751712071727156 5556155468800398 o

Reply
mikeh65
Posts: 794
(@mikeh65)
Prominent Member
Joined: 19 years ago

Last year I use a similar setup as you are describing. I used J-hooks for all of my pipes. Over a 10' length of pipe I put 4 hook in. I just hung the pipes from my gutters. Where I didn't have gutters I found the same 12" strapping from home depot. I made a couple of bends at the end to make sure it would not flex. Stopping at on of the big holes. I then slid the strapping under the end shingles and hooked the J-hooks to the strapping. Worked great, made my roof-line setup much easier and took half the time to set it up. Can provide pic if needed.


Reply
Posts: 299
Topic starter
(@dcamron)
Reputable Member
Joined: 10 years ago

Thanks for the advice. I see a couple of things that I'll try in the next few days.


Reply
Posts: 30
(@jasonp)
Eminent Member
Joined: 10 years ago
scootchu wrote:For your gutters and gable ends I did this. Simple strapping from Home Depot. Doesn't rust, stays in place and slides under shingles.

Any particular method you used to bend them?


Reply
Posts: 18
(@dchackert)
Eminent Member
Joined: 9 years ago
scootchu wrote:For your gutters and gable ends I did this. Simple strapping from Home Depot. Doesn't rust, stays in place and slides under shingles.

What exactly are those? Love the idea

Sent from my HTC Desire 626 using Tapatalk


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

There's a UPC code on a photo above...

Sent from my SM-G930T using Tapatalk


Reply
Page 1 / 2
Share: