Depending on which advert you look at, nobody seems to agree on the number of pixels this actually supports (if running in standalone mode). Who knows...
On thing I noticed about the WS2811 data when viewing in a scope was a small delay between each set of three bytes. I'm not an expert on what's 'normal', but many controllers output the bytes back to back IIRC, then there's just the long 'low' to mark the end of the data frame. So there's a small 'low' period every 24 data bits.
So I'm going a little off-topic, but the takeaway from this is there can be issues mixing different IC types (timing problems) on a WS2811 data stream. The good news is the festoon lights do work (i.e. start on output channel + 6) via the board I made. But the 12V LED strip (which uses a slightly different IC) is not compatible. BTW in the image the ICs don't show since they are 'surface mounted' on the reverse side. The yellow resistors are 3.3K to drop the supply voltage to about 5V for the ICs, the blue are 33 ohm which it's good practice to install on the data lines.
If you're simply looking for 1 universe of pixel data from a DMX feed, I've been using these boards for years. Cost about $20, and easy to throw in a cheap "tupperware" box for weatherproofing.
https://www.ebay.com/itm/222620578305?
Thanks! I wish I'd found this, mainly because it's much smaller. Yes that would do what I need too.
The one I have has the advantage of the 5 x PWM outputs which I will also be using, though without these it should be possible to build something based on WS2811 ICs which cost next to nothing.
Update - I'm noticing significant latency on the SP201E board when integrated into my sequenced shows. Having run a few tests it's about 1/10 second behind how my other controllers respond (which are a variety of different devices). Doesn't sound much, but it's really noticeable when timing to music and/or switching things at the same time as other controllers.
I didn't find a seller for the board mentioned above in europe or on AliExpress, but will keep hunting! - Oh, they're based in Israel.
Does anyone have any thoughts on how the alternative product mentioned above performs?

