MikeKrebs wrote:I would go back against the wall at that distance. IMO, You got it figured out correctly.
The reassurance is helpful. I think having it closer to the building will give me more of the wash look I am looking for. I plan to use it as perimeter lighting when there are no present holidays.
Sent from my iPhone using Tapatalk
MikeKrebs wrote:That would be strip mounted to the j-channel. Some people have luck with strip...a few hate it for the obvious problem of fixing it.
He actually used bullet pixels in the J Channel, drilling for each one. I prefer square though, as they sit a little flatter and gives more room for wiring / connectors.
For my permanent mounting on my house. I used J-Channel and drilled holes - 3" spacing. Bullets for the pixels and mounted the channel back, under the soffit. I wanted it that way to help protect the pixels from weather and sunlight. The lights look good, the angle works well from the street. For mounting, I slid the j-channel in the soffit and drove about 3 to 4 screws per piece to hold it in. Cover picture shows you what my house looks like. mounts are under house and garage rooflines.
mikeh65 wrote:For my permanent mounting on my house. I used J-Channel and drilled holes - 3" spacing. Bullets for the pixels and mounted the channel back, under the soffit. I wanted it that way to help protect the pixels from weather and sunlight. The lights look good, the angle works well from the street. For mounting, I slid the j-channel in the soffit and drove about 3 to 4 screws per piece to hold it in. Cover picture shows you what my house looks like. mounts are under house and garage rooflines.
Do you have pictures of your install on your Facebook page somewhere?
Sent from my iPhone using Tapatalk


