Activity
 
Notifications
Clear all
puppycrack
@puppycrack
Estimable Member
Joined: Dec 23, 2020
Topics: 27 / Replies: 79
Topic
Replies: 1
Views: 895
Reply
4 years ago
Forum
Reply
RE: Ray Wu fail, please recommend a different vendor

firstone wrote:If this doesn't work out, I guess I'm capable of some mild soldering so can order from anywhere. I've also ordered 2" spacing but I don...

4 years ago
Reply
RE: Show Network (Routing between wlan0 and eth0)

I got it working, although I'm not sure why this is needed. I set both interfaces (eth0, wlan0) IP Forwarding to "Masquerading/NAT". Not sure why re...

4 years ago
Reply
RE: Show Network (Routing between wlan0 and eth0)

kenoman742 wrote:On the network settings page towards the bottom change the "IP Forwarding" option from "Off" to one of the other settings. This has r...

4 years ago
Reply
RE: Show Network (Routing between wlan0 and eth0)

Dennis Cherry wrote:I had the same problem. The guys on the XLights Zoom Forum helped me setup my system correctly in FPP. Do you happen to recall ...

4 years ago
Topic
Reply
RE: FPP PB16 Pixel Controller

I've never built one of these diff receivers, so I don't know the spacing. There are a couple of free ones here for an older style F8 distro and for ...

4 years ago
Forum
Reply
RE: FPP + ESPixelStick

While I updated everything else to a current version, I hadn't done the same w/ xLights, which was still on 2021.23. Updated to current version (2022...

4 years ago
Reply
RE: FPP + ESPixelStick

As I could find no way to either DM you the .fseq file or post it as an attachment here on DIYC, I emailed it to what is hopefully your email address.

4 years ago
Reply
RE: FPP + ESPixelStick

I may be grasping at straws, but I was reading the thread for Issue #427 on github, and noticed a comment from you Martin: "The ESP expects the fseq f...

4 years ago
Reply
RE: FPP + ESPixelStick

I did that, but do not see any sort of error message on the Home Screen. FWIW, I was able to play to the ESP from xLights directly.

4 years ago
Topic
Replies: 8
Views: 2696
Reply
RE: Newbie here..Hello World!

I'd recommend the AusChristmasLighting 101 manual as a good first read to gain an initial understanding of things. Just create an account over there,...

4 years ago
Reply
RE: Need xlights model data for snowflake

If the model's not available as a download, you could use the custom model builder from David Peace to build your own model:

4 years ago
Forum
Page 1 / 8
Share: