SanDevices version ...
 
Notifications
Clear all

SanDevices version 5 firmware update, bug fix

8 Posts
7 Users
0 Reactions
2,422 Views
Posts: 1249
Topic starter
(@jstjohnz)
Noble Member
Joined: 17 years ago
[#57022]

Please see attached firmware file v5.051 for E682 with W5200 (standard) Wiznet module.

This is a bug fix to deal with an issue that caused the last 2 or 3 pixels of a universe to not update properly with some E1.31 senders.
Feedback appreciated, E6804 version, and versions for W5500 Wiznet module will be posted soon.

-jim-


7 Replies
Posts: 23
(@jrossi3334)
Eminent Member
Joined: 7 years ago

Can confirm Jim the issue appears to be gone. I used the same matrix i tested with before and all pixels now are correctly lit. Web page is nice and fast for respone too!! Awesome job!!


Reply
Posts: 629
(@dkulp)
Honorable Member
Joined: 14 years ago

Has anyone checked to see if the v5 firmwares work properly behind an FPP instance using the FPP proxy feature? We keep telling everyone that the SanDevices don't work as the v4 firmwares definitely do not work (due to ancient version of HTTP protocol it uses) but if v5 works, we'd at least have a suggestion for people.


Reply
JP90
Posts: 376
 JP90
(@jp90)
Reputable Member
Joined: 19 years ago

Yes it does, checked it with FP 5.5 no problem, just add the controller ip to the FP proxy and it will show up on the multisync page. Make sure you add it to the Raspberry pi that is connected to that controller and not the master if you are using master and remotes unless you have a controller on the master. My setup has a master and four remotes and only the remotes have controllers tied to them.

Gary


Reply
Posts: 23
(@jrossi3334)
Eminent Member
Joined: 7 years ago
dkulp wrote:Has anyone checked to see if the v5 firmwares work properly behind an FPP instance using the FPP proxy feature? We keep telling everyone that the SanDevices don't work as the v4 firmwares definitely do not work (due to ancient version of HTTP protocol it uses) but if v5 works, we'd at least have a suggestion for people.

Sorry I cant test that all my stuff is on its own network.


Reply
Posts: 15
(@gex598)
Eminent Member
Joined: 13 years ago

Xlights needs to be updated for version 5 firmware if you want to use the auto layout models and upload layout to controller. It seems some of the API calls have changed names causing the controller configuration updates to fail.


Reply
Posts: 849
(@tfischer)
Prominent Member
Joined: 17 years ago

Is there an updated firmware for the upgraded E681?


Reply
Keebler
Posts: 1691
(@keebler)
Noble Member
Joined: 18 years ago
dkulp wrote:Has anyone checked to see if the v5 firmwares work properly behind an FPP instance using the FPP proxy feature? We keep telling everyone that the SanDevices don't work as the v4 firmwares definitely do not work (due to ancient version of HTTP protocol it uses) but if v5 works, we'd at least have a suggestion for people.

I use some sandevice controllers (ver 5038fw) I'll have to check the FPP proxy and RB2U.

I tried to upload the fw, but the system is being dumb right now -
here are the links to the FW

fw 503801
https://sandevices.com/wp-content/uploads/2022/08/E682v5.038-01.zip

loader (required)
https://sandevices.com/wp-content/uploads/2017/11/fwloader_1_0.zip
Remember to change the E682v5.038-01 to firmware.eeprom, AND copy/move the firmware.eeprom to the folder with the loader file in it. then run the loader FIRST before attempting to update fw.


Reply
Share: