Sandevice E682 Powe...
 
Notifications
Clear all

Sandevice E682 Power Problem

70 Posts
8 Users
0 Reactions
13.2 K Views
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

here is me testing to volts at J19

I have disconnected all other power and removed all fuses and the 2A fuse still pops

IMG 1737

Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

I am not sure what else it could be or what else I should be looking for


Reply
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I am not great at this but the resister near the fuse is that the right one for it trying to figure out the code from what is online and what sandevice says should be there ok if I figured it right looks to be a 10k someone who knows this stuff would know better than me I could be wrong


Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

yes that is the same one in all the pics and in the manual


Reply
Posts: 64
Topic starter
(@techs21)
Trusted Member
Joined: 16 years ago

could the 5V DC‐DC Converter be bad and that is why it is blowing fuses soon as I give the controller power


Reply
Page 4 / 14
Share: