Notifications
Clear all

Sandevice 6804

9 Posts
2 Users
0 Reactions
2,275 Views
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago
[#47668]

Does anyone know what would cause an 6804 to output white when I'm in test mode trying different chases and effects? On port chases 2 are white and one I get nothing out of? Any ideas?


8 Replies
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

Did you solder the kit? If so, double check all the solder points.


Reply
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago

No I bought it all put together it was working fine and one section would go off then come back on in a sporadic pattern I started taking everything apart and now it's going crazy. I unplugged the controller and when I started it back up the lights turned white and It blew a fuse.


Reply
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

issues on all strings or just one?


Reply
Posts: 431
Topic starter
(@dkelly0802)
Honorable Member
Joined: 11 years ago

I have an 800 pixel tree with 200 pixels daisychained with factory pigtails on each port. It was the 3rd port that wouldn't go off and was acting crazy. I had injected power from the backend of each section of 200 but took that off to see if it would help but it didn't.


Reply
Page 1 / 2
Share: