Question about "cha...
 
Notifications
Clear all

Question about "channels"

34 Posts
16 Users
0 Reactions
8,905 Views
Posts: 447
(@blackbeard)
Honorable Member
Joined: 18 years ago

Do you typically have to deal with customs or other fees when ordering from Ray Wu?

Sent from my SM-G900P using Tapatalk


Reply
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago
Blackbeard wrote:Do you typically have to deal with customs or other fees when ordering from Ray Wu?

Sent from my SM-G900P using Tapatalk

My largest single order from him to date is $1900, and I've never had to pay customs or other fees.


Reply
Posts: 50
(@blarson)
Trusted Member
Joined: 11 years ago

I don't want to take over this thread but someone mentioned the new falcon f16v2 and it made me want one. But I have 1 e682 for my mega tree and I want to add a new controller for the new house lights for next year. Is it a bad idea to mix different controllers? I.e. 1 e682 and one falcon f16 or alphapix etc? Does it complicate things?


Reply
smeighan
Posts: 2595
(@smeighan)
Famed Member
Joined: 15 years ago

Many people use multiple controllers. Just configure your sequencer to match. I think the biggest investment is learning how to use/configure your controllers. I do think the falcon 16 v2 is the best controller. It can drive twice the lughts of any other controller ( 16 strings, each can be 680 nodes or 2000 channels per string). Built in e1.31 tester. Are people aware of virtual strings? On one output u could have 8 ws2811 flex strips (8x50 ch=400 channels) and then feed that into 280 1804 bullet nodes. Flex strings and bullet nodes have different rgb orders. The e682 has strings in groups of four, f16v2 can not only have a different rgb order per output, lights can be daisy chained together on one output and correctly handle mixing different rgb order, dave pitts you are a master!

Sent from my iPhone using Tapatalk


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago
BLarson wrote:I don't want to take over this thread but someone mentioned the new falcon f16v2 and it made me want one. But I have 1 e682 for my mega tree and I want to add a new controller for the new house lights for next year. Is it a bad idea to mix different controllers? I.e. 1 e682 and one falcon f16 or alphapix etc? Does it complicate things?

Mixing is not a problem. All controllers mentioned work off E1.31 (at least). Even if you did have multiple protocols, there are many different ways to hook up things. That is what makes DIY Christmas lighting so much fun.


Reply
Posts: 33
(@j-dubb)
Eminent Member
Joined: 12 years ago
Blackbeard wrote:Do you typically have to deal with customs or other fees when ordering from Ray Wu?

Sent from my SM-G900P using Tapatalk

I have almost every time I have ordered from Ray on large orders. DHL delivers it and before they drop it off they let me know the import/customs fee. Smaller orders haven't been taxed, but the ones that have been several thousand have had an additional tax on them. I have noticed that when Ray sends his packaging item list with total costs next to them, he changes the price that we actually pay to something way lower to possibly help us out on the import fee? Has anyone else noticed this as well?


Reply
Posts: 77
(@croberts)
Trusted Member
Joined: 11 years ago
rtyfz450s wrote:I think you are confusing outputs and channels. A typical pixel controller like the falcon f16v2 or SanDevices e682 has 16 outputs. Each output can be attached to a string of pixels that can get as long as about 200 (without issues) with a maximum channel count of 6120 using unicast or 2040 pixels. a kit would cost you 109. each 100 strand or strip is around 30 dollars. so pixels are the expensive part

Thank you, my first post. After a lot of reading this cleared up what I was looking for. I was wondering why I ordered an Alphapix 16 V2 with so many channels per output when the LOR and other software limited the universes. I had a clue when the card used every other universe number for the outputs but this is the first confirmation I could find.


Reply
Posts: 77
(@croberts)
Trusted Member
Joined: 11 years ago

This helped a lot. Instead of wasting 4 outputs for my 500 pixel mega tree test I was able to only use 2 outputs. Figuring out which channels each string would use was kind of fun with X Lights 4 in test mode. I was able to map out all the start and end pixels for each string then use the numbers to create the custom mega tree. I have the 10 - 50 pixel strings hanging up on the wall of my computer room for testing. It is working great.


Reply
Posts: 50
(@blarson)
Trusted Member
Joined: 11 years ago

I want to start by saying thank you to all of you for all your help with my first display last year, and I apologize for reviving this thread. I just didn't want to start a new one.

I loved having my mega tree last year and ended up buying a bunch of stuff from holidaycoro to do my gutter and windows in pixels this year, as well as adding more pixels to the mega tree. Well I remodeled the back yard this year and it took up and is still taking my light prep time. So my plan now is just to make the mega tree even mega'er and if I find extra time I will add lights to the house.

So I read that my e682 will handle 1020 pixels in multicast and 2040 in unicast. Right now my tree has 600 pixels on the tree (24 strands of 25 pixels) and 192 lights in the globe for a total of 792 pixels. I still don't really understand the multi/unicast thing. So my question is how many pixels can I add to my tree?

What I want to do is to triple my pixels on the tree. So 1800 pixels(30 strands of 60 pixels). So there would be a total of 1992 pixels. Can I do this with an e682? I am using XLights to control it. I have a Alphapix 16 v2 which I bought to control the the lights on my house, but I could always use that for my tree if I needed too. But $$.

Thanks in advance for the help.


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago

Not sure where it currently stands as I have not kept up with the progress, but originally with ver. 5 firmware on the e682 it was supposed to raise the pixel count up to 2700


Reply
Page 3 / 4
Share: