j-dubb
@j-dubb
Eminent Member
Joined: May 15, 2015
Topics: 1 / Replies: 32
Reply
RE: How to make a Pixel Spiral North Pole

Has anyone made a taller version of this? I love this design and I'm fixing to make some, but was wondering if anyone has made a 5ft or 6ft version an...

9 years ago
Reply
RE: Built my P10 enclosure today

Looks like your P10 panels are configured wrong. Hard to see the other arrows but if looks like you have them setup wrong?

10 years ago
Reply
RE: ASAP Pole

Wolfie wrote:I was planning on leaving it supported by the winch. At least the first year until all the stretch is gone from the strips. Didn't want...

10 years ago
Forum
Reply
RE: ASAP Pole

Just finished building my ASAP and Portable hole II, I know some people have talked about lowering the inside pole down and resting it on a pin on top...

10 years ago
Forum
Reply
RE: HDPE Arch above door, need some mounting advice

algerdes wrote:Will "brick clips" work in the spaces between the stones? (The kind that you squeeze, put into place, let go - and it grabs both sides...

10 years ago
Reply
RE: HDPE Arch above door, need some mounting advice

Rick Todd wrote:How about putting in inside the archway and letting the tubes natural curvature hold itself in place. It won't follow the outline of ...

10 years ago
Topic
Replies: 9
Views: 3961
Reply
RE: How do I layout the sides of my house in xLights???

Just take a picture of the side of your house and place it next to a picture of the front of your house(using paint or photo shop) and place your mode...

10 years ago
Forum
Reply
RE: Good price on 12v power supplies

I think its like most things out there, every once in awhile you get a bad apple. I know tons of people who run Chinese power supplies for years now w...

10 years ago
Forum
Reply
RE: Need Advice: Mounting pixel strips on a brick wall

Polecat99 not sure if you're aware of this but you can heat up that 1 inch pvc and make the bend for the top of your arch. That way its easier to work...

10 years ago
Reply
RE: Introducing the new thumb saver: PixelPusher!

Anyone want to print one and charge for one plus shipping?

10 years ago
Reply
RE: ASAP Pole

Very impressive Walter!!! Has anyone tried this with other toppers? For example one from Boscoyo?

10 years ago
Forum
Reply
RE: The Christmas light fight wants to give you $50,000 !

The email is just an automated email they send out to anyone and everyone on their list. If you have attended the Expo they more than likely have your...

11 years ago
Forum
Reply
RE: Gutter pixel mounting options

I did something really similar. I mounted 2811 strips to 1/2 pvc, I then zip tied the pvc to 6 inch sections of J-channel vinyl siding(I cut 16ft J-ch...

11 years ago
Reply
RE: Question about "channels"

Blackbeard wrote:Do you typically have to deal with customs or other fees when ordering from Ray Wu? Sent from my SM-G900P using Tapatalk I have al...

11 years ago
Page 1 / 3