I got PX1 PCB from Wayne, and parts from Mouse (combined with what I already had on hand). Soldered it up tonight.
But, when I went to program the 16F1825, as suggested by http://doityourselfchristmas.com/wiki/index.php?title=Renard_PX1_Pixel_Controller#Assembly_Instructions , I can't select the Pickit2 programmer for that device. I tried to track down some FW ("operating system) update for the Pickit2, but can have been very limited on what I can find.
I did update the PICKit2 Programmer app (to 2.61.00), with Device File 1.61.00, and OS FS ver 2.32.00. The Microchip website seems to have had the Pickit2 info purged.
So, can I use the Pickit2 to program the PIC for the PX1???
Help.
Jimboha
i have managed to do it last week as i was getting errors on my PX1 and it worked fine.
I followed this
and it worked first time for me
Regards
Ted
Thanks, Ted! Somehow I couldn't find that thread. Had all the info I needed. Got the PIC programmed, it changes the on-board status LESDs. Now to hook up a pixel string and see what happens!
Thanks again.
Jimboha
jimboha wrote:Thanks, Ted! Somehow I couldn't find that thread. Had all the info I needed. Got the PIC programmed, it changes the on-board status LESDs. Now to hook up a pixel string and see what happens!Thanks again.
Jimboha
Glad I managed to help you with it. both my px1's work now so I can carry on building everything. this 1st year things take a lot of work lol
Glad that write-up is getting some play 🙂 Makes it worthwhile.
Bruce
boyelroy11 wrote:Glad that write-up is getting some play 🙂 Makes it worthwhile.
Oh, yeah - definitely appreciated!
BIG Thanks!
jimboha
kartingted wrote:this 1st year things take a lot of work lol
Boy, is that an understatement! Besides a small handful of pixels, I'm doing:
1. 136 channels
2. 2 Leaping Arches
3. Two Firesticks
4. 1 Bethlehem Star (Coro, not metal frame)
5. 3 Animated Angel-Bells (different sizes; avg. 500 LEDs ea)
6. 6 mini trees
7. Tune-to Radio sign
8. About 10 full-wave LED strings I had to shorten & re-configure electronically
9. I bought 5 used Renard controllers, so limited soldering. But I need to repair a few things.
10. Pixels (limited number - either 25, 50, or 75 depending on how my experiments go).
Those are just the things I had to make/modify. This year I will have about 200 strings/16K lights, about half LED (some of them in the display elements I made). Planning to sequence 5 songs. Will use 3 power circuits - may have to add one to the power panel.
Phew! Thank goodness for Excel. I have about a 100 spreadsheets to plan and track all this stuff.
Of course, next year won't be much better. For next year, add:
1. 2 Leaping Arches
2. Three Firesticks [total 5, but as Rainbow Tubes]
3. 3 Animated Angel-Bells (different sizes; avg. 500 LEDs ea)
4. 3 mini trees
5. Chase-cicles
6. Controllers to support [about 90 more channels]
7. Oh, yeah - to keep post on-topic: more pixels.
After that, things will "slow down"... (And if you believe that, .... )
jimboha
This year is totally from scratch and I'm doing under 80 channels not including my pixel arches and pixel matrix
I also need to make a train for the wife
Ditto, first year from scratch. Do me a favor, don't say TRAIN too loud. If my wife hears that, I'm sure I'll have even more work to do... 😉



