I must start by saying I'm a perfectionist. I love pixels, but at the same time I've run into power problems with some of the pixels items in my Christmas light display. I hate that when I tell a series of pixels to display white, they are all NOT the exact same white color. I assume this is voltage variations along the series of pixels I am powering.
Anyway now I am considering building a large pixel matrix into my display. It would be made of pixel strips, I'm estimating 24 strips of 86 pixels (assuming a 30/m ratio). Can you guys recommend the best way to inject power into a matrix of this size? I could inject power into each row. 86 pixels would easily be powered that way, but I suspect the colors would be inconsistent at the end of each line. If I break each line into 2 pieces that would mean I have 48 injection points.
How many power supplies should I have to power this matrix? Is there a proper way to inject power into something this size, or can I just have one giant power supply with a giant 48-way soldered junction all connected to the same 2 power leads?
-=Steve
The 1st thing I would do it setup a couple test strips the legth you intend to use them in the matrix. See how the colors are based on various injection points. Feed power from one end, then from both ends and then from the middle only. See which one will meet your needs. If the colors look good by feeding from the middle then you could try to run a power bus up the middle of the matrix. Maybe feeding from both ends will give you better colors. There is no real definitive answer, you have to test it unless you want to over-engineer it.
A single bus may not work well, so maybe you will have to mount the psu near the back of the matrix and use 3 seperate feed lines from the psu to 3 smaller power bus lines, 1 for the top section, one for the middle section and one for the bottom section.
All just some ideas. Experiment and see what gives the results you like.
I am not as OCD as you, if it looks white it is white enough for me. If anyone does not like it then do not look at it, unless that person is paying me to build it.
Thanks Macrosill. I've heard that it is better to use multiple power supplies rather than just one large one. But that could be wrong. I want to know how many power supplies I need to buy and I'd prefer to have them be as invisible as possible If I can buy one large one I'd prefer that.
-=Steve
Color differences can be from different manufacturing runs, too. Adding to a fixed display with new pixels is a problem.
sent from my Galaxy Note
