Pixelstick and mult...
 
Notifications
Clear all

Pixelstick and multiple elements

8 Posts
4 Users
0 Reactions
3,570 Views
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago
TheLost wrote:You should stick to around 640 pixels per stick (you can do more but your refresh rates will suffer). Its possible to do multiple elements of one 'stick' but you may need null pixels if the elements are not close together (you can only run one port/strand/string from the pixelsticks).

It would probably be easier to use a single controller for each element if the distances are too great. ESPixel's are ~$9... That's a small price for convenience & simplicity 🙂

NULL pixel or a buffer/driver if the distance is greater than 20' (lets not get into another cable quality discussion. This is the lower number for dirt cheap cable)


Reply
TheLost
Posts: 189
(@thelost)
Estimable Member
Joined: 10 years ago
mrGrumpy wrote:Last I saw the ESPixelsStick is selling only at amazon and about $20 - out of stock
Renard Plus ESP WiFi Pixel from Renard Plus Shop is $12

ESPixelStick @ $20 (handles up to 24v)
ESPixel @ $1.25 for 4x boards, ~$5 for parts, ~$3.50 for ESP-01 (handles 5v or 12v depending on how you build them)

Both run the ESPixelStick firmware.

You can also read about them in the Wiki


Reply
TheLost
Posts: 189
(@thelost)
Estimable Member
Joined: 10 years ago
MikeKrebs wrote:These are real DIY so if you are ordering ones and twos, the cost and shipping will go up. If you want 25 or so, you can do them inexpensively.

I just built 4 ESPixelPop tiny's a week ago:

4x Tiny boards
= $1.25 (edit: $2.25 with shipping)

Parts from Digikey for 4 boards = $16.65 (edit: $20.4 with shipping)
= $5.42 per board (w/ shipping costs added... $7.35)

I then ordered 4 ESP-01's from Amazon for $12.99 ($3.25 each)
= $8.67 total per board (edit: total w/shipping $10.60)

I love my ESPixelSticks... however having purchased a bunch of kits @ $10 each during the old group buys, I have a hard time paying $20 on amazon 🙂


Reply
Page 2 / 2
Share: