Ok I want to build a pixels tree this year, but was wondering if there is any easy way of creating and easy way to control it without a pc.
I'm thinking...can I do it by loading a program and sequence onto a memory card and running it on Arduino or raspberry with just power run to the tree.
It obviously can be done....but by a crane technician I'm not so sure ???
Any ideas ????
If you only plan to do a pixel tree, it would be very easy to sequence using Xlights, then play it back on a Raspberry PI using Falcon Pi Player.
A T-1000 or a T-8000 may work for this; but if you decide to sync to music or do a bigger display you may have to retire them.
Thanks for the advise. I'll look into xlights. I was a bit unsure about the arduino being able to handle enought pixels, I believe the raspberry can handle more ?
I looked at the t-1000 and thought about the raspberry but my thought keep turning back to the e862, mainly because of easy of wiring. I can run 16 cables of data and power out to 16 strings and job done ( if I can load it with a program and sequence without a PC ) in the summer and put it away till Santa comes to town and quickly get it out and plug it together.
My question is can I do a pixel tree with a sandevice without a PC ?
In my response, the Raspberry PI is the show computer not a pixel controller. You still need an E-682 or other pixel controller to control the pixels on the megatree. The raspberry pi could be placed out with the tree to send recorded data to the controller. You would need a PC to build the sequence with Xlights or other sequencing software but once that was done you could load it on the PI and make the tree a standalone system.
That controller is only good up to 170 pixels, not enough to run most pixel megatrees unless your purchase several.
The raspberry PI, xlights and e682 seems fine in principle but I got no experience with one. I used an arduino this year with borrowed code to create a quite good spiral tree for my first year.
Will xlights load everything onto the raspberry or would I have to get code like with the arduino and will it handle 16 string of 100 pixels.
Forgive me if I sound dumb but I usually play around with cable the size of your arm for a living.
