Pixel Strip questio...
 
Notifications
Clear all

Pixel Strip question

5 Posts
4 Users
0 Reactions
1,688 Views
Posts: 151
Topic starter
(@pat2k3)
Estimable Member
Joined: 12 years ago
[#36463]

Hey guys,

Just to be clear... a led strip 12v 1m 30/30 can only be found with ws2812 right? 30/30 can't be found with ws2811?

Sorry, very new to all this but getting there 🙂


4 Replies
Posts: 54
(@markb)
Trusted Member
Joined: 12 years ago
pat2k3 wrote:Hey guys,

Just to be clear... a led strip 12v 1m 30/30 can only be found with ws2812 right? 30/30 can't be found with ws2811?

Sorry, very new to all this but getting there 🙂

Those are basically the same, from a control standpoint. WS2812 is a chip with built-in LED, and the WS2811 chip is used with an external LED. They both speak the WS2811 protocol. A strip would typically use WS2812 chips, I think. Don't know if that answers your question at all.


Reply
Posts: 151
Topic starter
(@pat2k3)
Estimable Member
Joined: 12 years ago

Well, Can a ws2811 have a 30 led / 30 pixel ratio? I thought ws2811 would only be 30/10. But thats why I've posted this thread to get the proper answer 🙂


Reply
Posts: 512
(@habbosrus)
Honorable Member
Joined: 14 years ago

I'm pretty sure you can't get 30/30 in 12v. It's 5v only. If you want 12v, 30/30 you need to look at INK1003 here Otherwise it's 10/30 12v here
This is not the only place to get these items. I buy from Ray so I'm familiar with the links.


Reply
Posts: 184
(@micromutt)
Estimable Member
Joined: 12 years ago
habbosrus wrote:If you want 12v, 30/30 you need to look at INK1003 here

FWIW those INK are actually 5V. They have a 12V line and use converters to get 5V. This limits how often you can cut them and still use 12V.

inkare5v

Reply
Share: