Pixel string wire g...
 
Notifications
Clear all

Pixel string wire gauge

34 Posts
7 Users
0 Reactions
12.1 K Views
Posts: 1592
(@ruppro)
Noble Member
Joined: 11 years ago

To my knowledge, any of the current US Pixel suppliers, that the majority of user buy from, all get their Pixels from China. What you would need to find is a US Pixel Manufacturer, which I have not heard of any. And if there were any, their prices would be such that most of us would just purchase the Chinese Pixels and deal w/ the thinner wire.


Reply
Posts: 186
Topic starter
(@steve123)
Estimable Member
Joined: 7 years ago
Ruppro wrote:To my knowledge, any of the current US Pixel suppliers, that the majority of user buy from, all get their Pixels from China. What you would need to find is a US Pixel Manufacturer, which I have not heard of any. And if there were any, their prices would be such that most of us would just purchase the Chinese Pixels and deal w/ the thinner wire.

Agreed. The take away is that the two major suppliers from China often mentioned here are intentionally stating their pixels use 18 AWG wire in the product specification and undersizing the wire gauge in the actual product. Anyone using these pixels should be made aware of this misrepresentation and take steps to avoid any unintended situations where the wire, due to its undersizing, could result in a fire hazard. Likely the most appropriate thing to do to reduce the fire hazard is to reduce the size of the fuse used on the controller output ports to 3A, which is the ampacity of the wire being used.


Reply
Posts: 186
Topic starter
(@steve123)
Estimable Member
Joined: 7 years ago

Update: I have confirmed the wire gauge of the pixels supplied by ETOP Lighting (Paul Zhang, Alling) that state 18 AWG in their product specification is in fact 22 AWG wire. 22 AWG wire has an ampacity rating of 3A.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
steve123 wrote:Agreed. The take away is that the two major suppliers from China often mentioned here are intentionally stating their pixels use 18 AWG wire in the product specification and undersizing the wire gauge in the actual product. Anyone using these pixels should be made aware of this misrepresentation and take steps to avoid any unintended situations where the wire, due to its undersizing, could result in a fire hazard. Likely the most appropriate thing to do to reduce the fire hazard is to reduce the size of the fuse used on the controller output ports to 3A, which is the ampacity of the wire being used.

I think you are about 7-9 years late with this thread . We would be hearing of any issues to which you are fearing with the volume of Christmas displays loaded with pixels .


Reply
Posts: 602
Guest
(@bwinter)
Member
Joined: 10 years ago
MikeKrebs wrote:Actually, this thread is long overdue. Vendors should stop lying about their products. Past lies (everybody is doing it) are no excuse for correct specs.

I've always thought of it more like this: my no-name pizza joint down the street claims they have the "World's Best Pizza." I, too, wish they would stop lying about their product. But on the other hand, I know what I'm getting (especially at that price, and at 2am in the morning)...because I know their pizza is just fine for the purpose it's intended for.


Reply
Posts: 186
Topic starter
(@steve123)
Estimable Member
Joined: 7 years ago
angus40 wrote:I think you are about 7-9 years late with this thread . We would be hearing of any issues to which you are fearing with the volume of Christmas displays loaded with pixels .

You might be correct that this discussion is long overdue. Please forgive my intrusion as I am a newcomer to the hobby. IMO I think this matter should be discussed and at the very least people should be made aware of the issues so they can properly inform themselves about the hazards. I think for the average user the use of this equipment is not particularly considered hazardous because the equipment is "low voltage". I think the more education users have regarding the risks of using this equipment the more likely we will prevent serious incidents from occurring.

Another concerning observation is that the trend of the suppliers appears to be to reduce wire size even further. We see this in the offering of "promotional" pixels or other pixel strings that do not specify a wire gauge. I am not aware of any explanation or advisory offered by the suppliers regarding how to use these strings properly.

Ultimately, the reason we have electrical codes is we have collectively learned through bad experience that we need to protect ourselves from this kind of hazard. I think it is likely that a lot of this flies under the radar of consumer product safety because the major retailers do not carry this stuff in their bricks and mortar stores and this stuff is sold mostly through online retailers.

Perhaps if we collectively begin to ask the suppliers to stop misrepresenting their product specifications it would result in a positive change.


Reply
Posts: 602
Guest
(@bwinter)
Member
Joined: 10 years ago
steve123 wrote:
Perhaps if we collectively begin to ask the suppliers to stop misrepresenting their product specifications it would result in a positive change.

I think you might be underestimating the scope of this issue. Cheap/knock-off/imitation (or whatever you want to call it) products from these sites is simply par-for-the-course (this isn't limited to just the holiday lights hobby).

Caveat emptor isn't just a river in Egypt (or something like that...)


Reply
Posts: 1267
(@xmasinvancouver)
Noble Member
Joined: 10 years ago
steve123 wrote:You might be correct that this discussion is long overdue. Please forgive my intrusion as I am a newcomer to the hobby. IMO I think this matter should be discussed and at the very least people should be made aware of the issues so they can properly inform themselves about the hazards. I think for the average user the use of this equipment is not particularly considered hazardous because the equipment is "low voltage". I think the more education users have regarding the risks of using this equipment the more likely we will prevent serious incidents from occurring.

Another concerning observation is that the trend of the suppliers appears to be to reduce wire size even further. We see this in the offering of "promotional" pixels or other pixel strings that do not specify a wire gauge. I am not aware of any explanation or advisory offered by the suppliers regarding how to use these strings properly.

Ultimately, the reason we have electrical codes is we have collectively learned through bad experience that we need to protect ourselves from this kind of hazard. I think it is likely that a lot of this flies under the radar of consumer product safety because the major retailers do not carry this stuff in their bricks and mortar stores and this stuff is sold mostly through online retailers.

Perhaps if we collectively begin to ask the suppliers to stop misrepresenting their product specifications it would result in a positive change.

Steve don't misunderstand angus and bwinter, they aren't saying safety does not matter, and that electrical codes aren't there for a reason. What they are basically saying, and what I have as well, this has been happening for a very long time. It is the norm, not the exception. That may not be right, but despite that, almost everything comes from there and has for a very long time. And everyone, regardless of the industry they are using the pixels in, has been fine. Has gotten by. If you read some of the wikis and beginner posts available, you will see that their is very strong emphasis on safety that we follow as a matter of sound practice. Is it okay to misadvertise a product? No its not, but it is the reality. As much as everyone wants that to change, the cost would probably also go up significantly. So if we get these strings, and they run safely and the parameters are all within safe margins, it's beating the dead horse. In your case however, paying extra for the upgrade and getting 24awg instead... that isn't right. You will note however, that it is the norm not the exception. Some of the American vendors that use "true" 18 awg are usually charging a premiumz and they cater to those who are willing to pay that significant amount more for it. Ultimately, boil it down to this: get replacements or a refund or something, but even if you don't.... Your safe.

Sent from my SM-N960W using Tapatalk


Reply
Posts: 602
Guest
(@bwinter)
Member
Joined: 10 years ago

I wasn’t referring to the safety concerns. I just think “talking to the manager” to ask them to stop mid-representing their product isn’t likely to get you very far.


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

I think this is a great conversation to have, even if we only point out that those of us that are in this hobby acknowledge that we are using products that aren't exactly living up to the description. The biggest thing that jumps out at me is that we all need to be aware of what we are working with and what could *possibly* happen if we overload our systems in our displays. Yes, there is a risk of fire or damaging our home electrical system. However, I think that we as a group are always quick to help someone with some tips, gotchas, and concerns when we see that someone could possibly be putting themselves into harm's way. My other thought is that if you are concerned about what you are receiving as a product, use this community to ask questions, and, odds are that someone here has run into a very similar situation and can help with making sure you aren't going to fry anything, including your home and, more importantly, YOU.


Reply
Page 3 / 4
Share: