Pixel RGB assignmen...
 
Notifications
Clear all

Pixel RGB assignment.....

4 Posts
3 Users
0 Reactions
1,681 Views
Posts: 2507
Topic starter
(@mrgrumpy)
Famed Member
Joined: 12 years ago
[#36162]

New to Vixen, but finding it full of hidden options. Needs some help, or tricks to Group set RGB assignment.

I running a mix of Strips and Pixels on the same connector. Everything is fine, except the Strips are GBR and the Pixels are RGB.
I found where I can rearrange the assignment, but it appears it needs to be done for each pixel.....this would be a LOT of "nppct (non productive pixel changing time.)
I'm in Display setup, Graphical View and clicking on the Color Breakdown.

I have 2 runs, each with 168 GBR and 75 RGB - I need to change GBR to match RGB, or RGB to match GBR

How do I change a GROUP of Pixel from RGB to GBR, at element level.


3 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I just accidently caught your thread. This is more of a vixen question and would have caught my attention quicker if it were started in the vixen 3 forum. But I've got it now, so all is good. Sorry for the delay.

Unfortunately there is no easy way to currently do what you're asking in vixen. to directly answer your question. You cannot change the color order for a GROUP of elements. Furthermore, elements themselves don't have any order to their colors at all. in fact, they don't even have colors they just have color. (and it isn't even RGB, it's HSV) It isn't until it gets to the filter and post filter patching where color becomes colors and ordering comes into play.

Color order has always been best handled as a function of a hardware pixel controller. And because most pixel controllers already do a great job allowing for reordering of colors per pixel, it's usually not a big deal. It isn't until you get into "half and half" per string arrangements that this fails. You're usually better off changing your plan and using separate outputs on a pixel controller. In all reality, you could be asking the controller guys to be adding a feature to support this. It is afterall a hardware problem. When you go to change those pixels out next year because some failed, you may find out they're in another different order altogether. It's generally easier to handle this at the pixel controller, because controlling pixels and handling all of their variations is the pixel controller's entire reason for being.

You can get it done in vixen though if you really have to. But it is a tedious, manual process because there's no bulk editing for nonstandard configurations. The fastest way to do this is to setup the color handling for all the elements (as full mixing RGB), but not patch them to controllers using the easy patch button. Instead select the elements and the controller channels you want to work with, and switch to graphical view. I'd recommend doing this by only selecting a handful or so at a time so you can actually see what you're working with. You can then draw the patching lines manually from the breakdown filters to the output channels. The top output of each color breakdown filter will go to the third channel, and then the middle to the first, and the last to the second. You use the right mouse button to click-drag to draw the lines. Yes this does mean drawing 504 lines by hand.

An alternate method is to go ahead and patch them thru with the wizard, and then edit each color breakdown filter one at a time to put the colors in a different order. This actually takes longer and requires a lot more mouse clicks though.

We do plan on making some changes to support this in software, (some work has already been started) but it's not scheduled to be released anytime soon.


Reply
Posts: 2507
Topic starter
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Thanks Jon, I thought there was no option, but needed to ask. Now I need to decide whether I going to spend a lot of tedious nppct, buy another e6802, cable and power supplies.....hmmm, or new pixels.

Vixen 3 is a great program, hats off to you and your team....and a bow of thanks.


Reply
Posts: 204
(@m1anh)
Estimable Member
Joined: 12 years ago

Depending on what your sequence looks like?
One possible work around is to set different colours in the sequencer, So pick red for green and green for red. etc.
Does not work for pictures and video, but might get you out of a pickle.
i.


Reply
Share: