san devices e682 fa...
 
Notifications
Clear all

san devices e682 fail

6 Posts
4 Users
0 Reactions
2,371 Views
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago
[#36157]

Hi everyone, i just finished building my firts sandevices e682, but on the lest step where the green and read led indicator lights should be working, nothing happens, they won't turn on or blink at all. any suggestions please. How or where should i start with the troubleshooting. thanks.


5 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

I just seen another thread with someone having same problem ill drop you link too it if I can find it


Reply
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago

Thanks TazC


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

the newer e682 has an eprom selection jumper , I believe 2-3 is required

check the manual here

http://www.sandevices.com/downloads.html


Reply
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago

thanks angus i tried that already but still not working. It's driving me crazy!!!!!


Reply
Page 1 / 2
Share: