wow, didn't mean to cause such a stir..I just thought I would share a very simple test....i doubt I post something like this again...
I originally did not take voltage readings at the end of the string. I just did now, the Ray pixels 9.31v and the DIYLED Express 11.26v
My power supply was supplying 12.0 volts exactly. These pixels seem to work fine with 12.0 volts. I was only interested in the current draw of 100 pixels in 1 sting on 1 output and the AC current on the power supply. I need some idea of how much power i need for 6 controllers running approx 1000 pixels each. This test was in my office, the length of wire from the controller to the lights was only 2-3 feet.
Here is the power supply i used, it is from DIYLEDExpress
No, please do post stuff exactly like this again!! It helps us Newbs figure out what we're getting into!!
Thank You!!!
ArcadeNut wrote:wow, didn't mean to cause such a stir..I just thought I would share a very simple test....i doubt I post something like this again...I originally did not take voltage readings at the end of the string. I just did now, the Ray pixels 9.31v and the DIYLED Express 11.26v
My power supply was supplying 12.0 volts exactly. These pixels seem to work fine with 12.0 volts. I was only interested in the current draw of 100 pixels in 1 sting on 1 output and the AC current on the power supply. I need some idea of how much power i need for 6 controllers running approx 1000 pixels each. This test was in my office, the length of wire from the controller to the lights was only 2-3 feet.
Here is the power supply i used, it is from DIYLEDExpress
You didn't create a stir. I liked your post. I was curious why it was being critiqued so much.
Thanks for posting.
ArcadeNut wrote:wow, didn't mean to cause such a stir..I just thought I would share a very simple test....i doubt I post something like this again...I originally did not take voltage readings at the end of the string. I just did now, the Ray pixels 9.31v and the DIYLED Express 11.26v
My power supply was supplying 12.0 volts exactly. These pixels seem to work fine with 12.0 volts. I was only interested in the current draw of 100 pixels in 1 sting on 1 output and the AC current on the power supply. I need some idea of how much power i need for 6 controllers running approx 1000 pixels each. This test was in my office, the length of wire from the controller to the lights was only 2-3 feet.
Here is the power supply i used, it is from DIYLEDExpress
Like phrog30, I too do not understand those flexing their knowledge at your expense....I'm sure this wasn't their intentions. I also want to thank you for your post.....I was going to do similar, but never found the time....now I have your chart.
Question: Ray Wu's pixels seems to draw substantialy more current, but you later answered "a little brighter"
@ 100% white, Ray's draw about 33% more current.....I would think this should be noticeable different, therefore telling me they are likely much less effeciect. If you get a chance, look at them again and advise if the added power losses is worth the additional brightness.....your option only necessary. And no supporting data necessary.
ArcadeNut wrote:wow, didn't mean to cause such a stir..I just thought I would share a very simple test....i doubt I post something like this again...I originally did not take voltage readings at the end of the string. I just did now, the Ray pixels 9.31v and the DIYLED Express 11.26v
My power supply was supplying 12.0 volts exactly. These pixels seem to work fine with 12.0 volts. I was only interested in the current draw of 100 pixels in 1 sting on 1 output and the AC current on the power supply. I need some idea of how much power i need for 6 controllers running approx 1000 pixels each. This test was in my office, the length of wire from the controller to the lights was only 2-3 feet.
Here is the power supply i used, it is from DIYLEDExpress
You misunderstand.. there is no "stir". I was asking you for some more info to quantify how you got the data. Then Phrog30 asked a question for which I answered with an explanation. A conversation should not be considered "a stir".. otherwise what is the point of a forum?
That type of info is very important to those just getting started with pixels and especially with higher numbers such as 1000 or maybe 10000 pixels. Small amounts of data left out can wind up possibly causing issues if stuff is designed too close to the limits, as I said before. The info you posted now is good stuff also and ties the rest of it together. I really didn't ask for the voltage at the end of the string but that is also great info. That tells me you are using strings with internal regulators on a single pixel. It also tells me that it would be possible to run a much longer string of DIY vs. Ray's.
You also said the brightness is slightly different.. a lot of people are running pixels at a max of 80% because they really can't tell that much difference in the brightness at 100%. Perhaps DIY has taken that into account and limited the current draw to some lower value because the brightness gain is not worth the extra power and voltage drop. This is also great info..
When you put the two posts together there is a lot of really good info... We love posts like yours.. just want to get the whole picture.. which is important for designing things.. Not a "knowledge flex".. and certainly there was nothing at your expense. I question to help with a complete picture. And BTW, I explained why I was asking.... to quantify my questions as well.
Phrog30 wrote:You didn't create a stir. I liked your post. I was curious why it was being critiqued so much.Thanks for posting.
It wasn't being critiqued.. If you actually read what I wrote.. I was asking questions and explaining why I was asking.....
If you are referring to the input voltage comments, was he using PFC supplies or just regular run of the mill Chinese low cost supply? Without knowing those references, the input current really has little meaning for those that are not using the same as he is. And how would you know if that info is not there? I was not critiquing.. I was inquiring with an explanation so you knew why I asked...
I like your post a lot too 🙂
Please keep going with stuff like this!

