I want to upgrade my Incan Megatree to pixels. At this time it is the only part of my display
that I am interested in having in pixels. I have converted most of the rest of my house lights
to led. I am trying to go with the easiest configuration I can find. I know it won't be "Turn-Key",
but will be a step in that direction.
I found this setup and wondered what others opinions or concerns might be.
Has anyone used or have any experience with this product?
Looking forward to any comments or suggestions !!!
Hmm - I can't really comment on what the quality of assembly would be, but I run a pixel megatree with pretty much the same setup (i have an e681, so a little older model, but same idea). I use vixen to run my show, and xlights to configure the pixels. However, I can tell you that I spent lots of time coming up with the design and assembly of the pixel tree. Not sure what you're going to do with the pixels, but plan some effort around mounting, etc. Lots of good ideas in this forum, and some cool new products that can probably save you some time (coro matrices, etc).
If you go direct to sandevices for the controller, and find your pixels online somewhere, you'll probably save a couple hundred bucks. The e682 assembly isn't very difficult if you've done some soldering.
Yup you could save between 200 and 300 dollars even with a fully built controller from sandevices.
e682 built 189
16 strands of pixels from DIYLED express (18 per string) 288
CG 1500 enclosure 13
12 Power supply 20
Total 510
All you would need to do is install it in the enclosure and run wires to the ps and the pixels. The big issue this time of year is finding the pixels. DIYLED is out of stock.
I would buy the parts separately. Purchase the E682 from Sandevices as a kit and solder it. Order pixels from DIYledexpress with a power supply. Then order the pixel strips from Boyosco to make spacing easy. What Seasonal doesn't tell you is that you'll need ANOTHER enclosure for your power supply. That enclosure is WORTHLESS IMHO as both the E682 and power supply can fit in a CG1500 enclosure together. As far as Seasonals pixels, I've never used them and never heard anything bad about them. I would check with someone as I'm not sure if it's 1 or 2 5050's in their pixels. Pixabulbs from diyledexpress have 2 which makes them really bright.
Hmm - I can't really comment on what the quality of assembly would be, but I run a pixel megatree with pretty much the same setup (i have an e681, so a little older model, but same idea). I use vixen to run my show, and xlights to configure the pixels. However, I can tell you that I spent lots of time coming up with the design and assembly of the pixel tree. Not sure what you're going to do with the pixels, but plan some effort around mounting, etc. Lots of good ideas in this forum, and some cool new products that can probably save you some time (coro matrices, etc).
If you go direct to sandevices for the controller, and find your pixels online somewhere, you'll probably save a couple hundred bucks. The e682 assembly isn't very difficult if you've done some soldering.[/QUOTE
Thanks !! I thought about the E682 Kit. I am pretty good with the soldering. I have 4 Renard SS24's, 4 - SS16's, 2 - SS8's and some other smaller boards and assembled
all of them myself with no problems at all. I am not at all experienced in which types or brands of pixels I should get to make sure they are dependable. I think I would
be better off with 12v Pixels instead of 5v. Do most people use the 12v?
