Pixel Megatree Ques...
 
Notifications
Clear all

Pixel Megatree Question

14 Posts
6 Users
0 Reactions
3,721 Views
Posts: 446
Topic starter
(@amigorick)
Honorable Member
Joined: 16 years ago

Thanks !!! I appreciate the advice !!


Reply
Posts: 446
Topic starter
(@amigorick)
Honorable Member
Joined: 16 years ago
MindTrik wrote:I would buy the parts separately. Purchase the E682 from Sandevices as a kit and solder it. Order pixels from DIYledexpress with a power supply. Then order the pixel strips from Boyosco to make spacing easy. What Seasonal doesn't tell you is that you'll need ANOTHER enclosure for your power supply. That enclosure is WORTHLESS IMHO as both the E682 and power supply can fit in a CG enclosure together.

Thanks !!!


Reply
Posts: 446
Topic starter
(@amigorick)
Honorable Member
Joined: 16 years ago
Amigorick wrote:Thanks !!!

What type spacing do most use for the Megatrees? If you use a 50 pixel node string, would 2" spacing be okay.
I plan on 16 strings for the tree with it being about 16 feet tall + or -.


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

Mine are 6" spacing 20 strands/180 degree tree for example here,

shot from about 20 yards away GO WITH 12V!!! MANY reasons to not go with 5V...NO reasons to not go with 12V. You'll save yourself some power headaches!


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
MindTrik wrote:Mine are 6" spacing 20 strands/180 degree tree for example here,

shot from about 20 yards away GO WITH 12V!!! MANY reasons to not go with 5V...NO reasons to not go with 12V. You'll save yourself some power headaches!

I wouldn't have guessed yours were 6" spacing.


Reply
Page 2 / 3
Share: