I agree with the others. Pixel strips need to be protected. I'd opt for the something from Boscoyo that utilizes standard nodes. It will last longer and you'll fight with it way less.
These are going to be part of my yard outline. Viewing distance is 8ft to close to 40ft if viewing from the street. I did consider both the pixel pole ( not sure if it will give me the look that i had pictured) and the nodes through PVC ( ease of repairs). I was hoping opinions on the strips not being encased would have improved since the addition of the silicone sleeve, but I see that the general census is that they are still not ideal for what i had in mind.
Thanks for the input, looks like i'm back to square one.
I read someone solved his protection problem by wrapping the strips with stretch film. This was his last attempt to reduce failures to a minimum.....since wrapping no failures.
Look at the boscoyo pixel strip. Gives the same sort of alignment and are easy to work with.
yeah boscoyo strips were the alternative method. the down side is i wanted the poles to look festive when not lit.
