Mounting Nanostatio...
 
Notifications
Clear all

Mounting Nanostation Outside

14 Posts
11 Users
0 Reactions
4,075 Views
Posts: 86
Topic starter
(@onceler)
Estimable Member
Joined: 9 years ago
[#50469]

Hello,

I have the bright idea of mounting a nanostation outside my house for next years show. My goal is reduce the amount of layers and chances for failures in my show. I'm currently looking to mount it behind some bushes in my front yard. How do you guys mount these things?


13 Replies
DrNeutron
Posts: 2016
(@drneutron)
Noble Member
Joined: 14 years ago

I have mounted mine for last 2 years on a piece of EMT. I just drive the EMT into the ground and attach the Nano using cable ties.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

You should not mount it behind foliage. That'll significantly degrade the signal.

Mine is permanently mounted to the antenna mast above my chimney.


Reply
dirknerkle
Posts: 10308
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

The best possible wireless connections are made when there is nothing but air between the transmitting antenna and the receiving antenna within the acceptable distance between the two. Anything -- and I mean ANYTHING -- that you put in between the two will degrade the signal in some way, and the more things you put between them, the more those things will affect the signal. Even painting the Nanostation a different color can impede the signal.

You can't defeat the laws of physics on this. It's a choice you have to make.


Reply
Posts: 49
(@jackal24)
Trusted Member
Joined: 8 years ago

I ziptied mine to the trunk of a small tree. (No branches or leaves in the way)


Reply
Page 1 / 3
Share: