Pigtail wire color ...
 
Notifications
Clear all

Pigtail wire color coding - ScottLED 3-core

5 Posts
3 Users
0 Reactions
3,664 Views
Posts: 844
Topic starter
(@ags0000)
Noble Member
Joined: 16 years ago
[#49695]

Can anyone provide definitive guidance on the color coding used with ScottLED 3-core pigtails?
I've read that Ray Wu's coding is different.


4 Replies
Posts: 49
(@jackal24)
Trusted Member
Joined: 8 years ago
ags0000 wrote:Can anyone provide definitive guidance on the color coding used with ScottLED 3-core pigtails?
I've read that Ray Wu's coding is different.

Don't know about ScottLED, but Ray Wu's is:
Brown 12V
Blue Ground
Yellow Signal


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

I have over 1,000 extensions, pigtails and T's from Scottled. Extensions and T's Red V+, Black V- and Yellow Data. Pigtails Red V+, Blue V- and white data. Always best to get out meter and check when in doubt


Reply
Posts: 844
Topic starter
(@ags0000)
Noble Member
Joined: 16 years ago

@uncledan are the "extensions" cables with male and female connectors on opposite sides, and "pigtails" a male or female connector on one side and bare conductors on the other? I'm surprised that the conductor colors differ between the extensions and the pigtails. Maybe sourced from different manufacturers?


Reply
Posts: 486
(@uncledan)
Honorable Member
Joined: 11 years ago

Extensions have male and female connectors on opposite ends. The pigtails I get have white ends/connectors with three wires, no outer black jacketing with 20cm of wire


Reply
Share: