Notifications
Clear all

Longevity...

29 Posts
18 Users
0 Reactions
9,127 Views
Posts: 654
(@szaske)
Noble Member
Joined: 14 years ago

I had one of my 500 2811 pixels go bad this year, but I blame myself for that. I had installed them upside down, and the C9 covers became little water cups with our heavy Seattle rains. Bought from Ray Wu. -=Steve


Reply
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
budude wrote: nor do the 3001's on my MT..

Hey "dude"..... I'm thinking of going with 3001's on a MT also.....which ones did you use? Do you have any tips on how to install them?

Thanks

SC


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
Santacarl wrote:Hey "dude"..... I'm thinking of going with 3001's on a MT also.....which ones did you use? Do you have any tips on how to install them?

Thanks

SC

They're really no different physically from most of the other pixels - I mounted them to wire rope so they could hold all the tension - http://christmasinsj.com/wordpress/?p=302 . I didn't tie them to the cable as shown in the pictures but just tied the wires every other pixel. I used a normal steel hook-head at the top and to a small bungee cord to a tent stake - worked great!


Reply
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
budude wrote:- I mounted them to wire rope so they could hold all the tension ---- I didn't tie them to the cable ----just tied the wires every other pixel.

Hmmm..I currently have a spiral hybrid MT and that's what I did on the verticals.... Like you said...works great but I was thinking that I needed to secure the pixels so that they stayed put..... By that I mean....my C6's on the current tree are pointed in every direction possible......as there is nothing to hold them in place..... The wire rope does a great job of support and taking the strain/load but I don't even try to control which way the individual bulbs twist/align. Looks fine on the current tree but I was thinking for 'drawing' purposes on a pixel tree you'd need more precise placement..... Am I being too obcessive/nitpicky?

SC


Reply
TitusCarnathan
Posts: 43
(@tituscarnathan)
Trusted Member
Joined: 14 years ago

I got mine from DIY Led express I guess they are ray wu's I am not sure. I had issues with them getting water in them. Moved them under the eave of our house and problem solved.


Reply
Posts: 1763
(@santacarl)
Noble Member
Joined: 19 years ago
TitusCarnathan wrote:I had issues with them getting water in them. Moved them under the eave of our house and problem solved.

Titus....I keep hearing horror stories about water problems..... What design were yours?

I'm a bit nervous about sinking that kind of $ into something that is problematic..... I know there are ways to seal them but man that sounds labor intense.

I guess, since most of these seem to be for sineage, they really weren't designed to be out in the open with zero protection from the elements. I even see some threads talking about UV problems...... I'm starting to wonder if I need to wait until they are a little more reliable. It would be bad enough to have to waterproof your own but the thought of a mega tree going into a 'whiteout' due to water issues would make me pull my hair out......

I went away from incadescents to avoid having to spend half the night chasing bad bulbs every night.....now after a rainstorm I'm worried about pixel leaks......


Reply
TitusCarnathan
Posts: 43
(@tituscarnathan)
Trusted Member
Joined: 14 years ago
Santacarl wrote:Titus....I keep hearing horror stories about water problems..... What design were yours?

I'm a bit nervous about sinking that kind of $ into something that is problematic..... I know there are ways to seal them but man that sounds labor intense.

I guess, since most of these seem to be for sineage, they really weren't designed to be out in the open with zero protection from the elements. I even see some threads talking about UV problems...... I'm starting to wonder if I need to wait until they are a little more reliable. It would be bad enough to have to waterproof your own but the thought of a mega tree going into a 'whiteout' due to water issues would make me pull my hair out......

I went away from incadescents to avoid having to spend half the night chasing bad bulbs every night.....now after a rainstorm I'm worried about pixel leaks......

Here is the ones I have http://www.diyledexpress.com/index.php?main_page=product_info&cPath=9&products_id=49&zenid=992b1c1f563aa1a9e92c1083625ac98e

The problem is that they are rated IP68 which means that it is fully dust protected and it can be submersed in water. But if rain can destroy them they are not IP68 They are a 3 or less for the water protection

For those of you that are wondering what the IP rating numbers mean

IP Ratings

Reply
Posts: 64
(@sparky3)
Trusted Member
Joined: 19 years ago

I have StellaScapes pixel strings, for three years now. Out of 34 strings, never had a whole string failure.
Out of the 34 stings 8 stings have had a single LED failure but they have never taken out the the rest of the string.
What I have seen is the green led gets weak, the single colors look good but the mixed colors are off.
And have had the white Led failure where the LED goes white when no data is going LED but it changes colors when data is going to it. If it is told to go red it turns off the red led on the one that is solid white and you end up with mix of the blue and the green left over.

over all after hearing the other stories on here. I am very happy with the StellaScapes strings.

Robert Clark


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
TitusCarnathan wrote:Here is the ones I have http://www.diyledexpress.com/index.php?main_page=product_info&cPath=9&products_id=49&zenid=992b1c1f563aa1a9e92c1083625ac98e

The problem is that they are rated IP68 which means that it is fully dust protected and it can be submersed in water. But if rain can destroy them they are not IP68 They are a 3 or less for the water protection

These lights are IP68 when used on a billboard as designed (fronts IP68 backs inside sign). However in our search for the cheapest pixels we take them outside of designed intent which can cause problems. We can deal with those problems or buy different lights designed for our purpose.
In our DIY nature here, we are always looking for more bang for our buck. Sometimes it works great, sometimes needs tweaking, sometimes a flop. Or
it may work in Calif. but not in New Jersey. But that's what this forum is all about. No malice intended just a little food for thought as we all try to work out
what we want to do with this great hobby.


Reply
Posts: 2168
(@djulien)
Noble Member
Joined: 19 years ago
Santacarl wrote:Looks fine on the current tree but I was thinking for 'drawing' purposes on a pixel tree you'd need more precise placement..... Am I being too obcessive/nitpicky?

It depends on which software tools/techniques you use to sequence and the pixel spacing. Pixels don't necessarily need to be aligned; see this thread for an example:

http://doityourselfchristmas.com/forums/showthread.php?24184-Here-s-some-MAJOR-outside-the-box-thinking!&highlight=chaos

don


Reply
Page 2 / 3
Share: