Steve Let me look tomorrow I think I have a extra laying around.
I wonder if you will have any range problems or signals issues with a ground plane and other traces under the antenna.
Thank you That was the issue. Looked at the last effect it shows the mining for start and end of the effect, used that for the timing. Rob
Put one together and see if it works. The one adafruit has a chip for voltage level conversion for the data lines. The little chip on the back is no...
Does any one Know how to use the 2821 address programmer. mine is all in Chinese and i cannot seam to figure it out? I sent a email to Ray still waiti...
That really looks like stellscapes stuff. I run there strings for the last four years not many issues with my own DMX to 2801 bridge. Never had a str...
now if they could make a decent socket for them so just the LED could be replaced on the string that would be great. See if ray could run with that id...
I have StellaScapes pixel strings, for three years now. Out of 34 strings, never had a whole string failure. Out of the 34 stings 8 stings have had a...
It is in eagle. I could try to export the gerbers but really not sure how. I either chemical etch the board or mill them. If you have eagle I will pos...
I think It would be nice just to use a port so the web server is always running while the lights are running. Would that be doable?
have a look at this. it can be controlled by remote, they say there is a wifi interface for smart phone. it will do RGB and moving lights It has ea...
Hello Jim. Do you have a parts list for the 681 boards yet. Looking for the part number of the fuse holders. Thank You
Will the PCB from Jim have the connectors? I did not get that when i read the first post. I have all the parts, prop,wiznet, chips. If that is how t...
Removed group buy kits, will get boards directly from jimThank you Rob
