Well pixel people. How are they holding up? I've heard mostly great things about Stellascapes. I've heard of some failures with everything else. A couple people are really upset. Leaks, UV breakdown, just failing pixels that kill half the string. What have you found? So far just testing them, I've burned up a dozen out of around 1800.
Jeff
I have a mixture of GECEs, 1809 strips (2nd year) and 3001 strings - - not a single failure to-date... The GECE's are on the peak of my roof so they get zero protection nor do the 3001's on my MT. The 1809 strips have at least basic protection from the eaves of the house but not much.
Jeff Millard wrote:Well pixel people. How are they holding up? I've heard mostly great things about Stellascapes. I've heard of some failures with everything else. A couple people are really upset. Leaks, UV breakdown, just failing pixels that kill half the string. What have you found? So far just testing them, I've burned up a dozen out of around 1800.Jeff
So, other than MPH, who is using Stellascapes?
The ONLY problems I've had this year are due to rain. I mostly blame myself for that. The problems are with lights that are being used in their second year and should have been inspected better prior to being installed. Lesson learned, and I don't expect to have the same problems next year. These were installed in gutter clips and only started having problems after very heavy rains. I suspect it was water literally running off the roof directly at the back of the pixels.
I've had a couple GECE failures. Both failures happened during setup/takedown or burn-in. I lost red on one which I pulled out, and another pixel stopped repeating data. I pulled 2 pixels in that case to diagnose later since I made that repair on the roof after installation this year. No other problems since.
EDIT: Note that this was 1 failure during storage (the lost red) and 1 during setup this year, but nothing else.
I've had no failures with mine from china.
kychristmas wrote:So, other than MPH, who is using Stellascapes?
Not too many people here.. They come at a cost that makes them unattractive to DIY.
mrpackethead wrote:Not too many people here.. They come at a cost that makes them unattractive to DIY.
Thanks, I thought I had missed something. Being geared to the commercial community, I assume it has to be solid.
kychristmas wrote:Thanks, I thought I had missed something. Being geared to the commercial community, I assume it has to be solid.
Here some examples why.. I have some 12mm modules installed 140' above the floor in a shopping mall. The cost and effort to get up and replace them, the Saftey forms, the work place distrubance etc etc, makes a $3 pixel the cheap part of the equation.
Bought 3000 TM1809 nodes from Ray this year. Only two failures. Last year's batch of 1600 had at least 20. I think the quality is getting better. I live in Colorado where there is hardly any rain but temperatures can be in range of 0F to 75F in November and December.
