J1SYS Product Matri...
 
Notifications
Clear all

J1SYS Product Matrix - Easy Reference for Controller Selection

17 Posts
12 Users
0 Reactions
7,817 Views
pmcpa
Posts: 1390
(@pmcpa)
Noble Member
Joined: 17 years ago

Thanks Eddy, as this is one of the reasons I have stayed away from J1sys products... as the info on the web site is lacking/confusing! When it shows PPOE support, does the PPOE (POE) also power the pixels, or just the boards?? Looking at the ECG-P2.

Also, anyone had any success using the ECG-PPX's with other pix's & controllers?


Reply
Posts: 604
(@aussiephil)
Honorable Member
Joined: 19 years ago
pmcpa wrote:Thanks Eddy, as this is one of the reasons I have stayed away from J1sys products... as the info on the web site is lacking/confusing! When it shows PPOE support, does the PPOE (POE) also power the pixels, or just the boards?? Looking at the ECG-P2.

Also, anyone had any success using the ECG-PPX's with other pix's & controllers?

Whilst i haven't actually tested them, however, because all that is happening is a simple unbalanced -> balanced line conversion and the reverse at the other end these should work wit all pixel controllers and even all pixel protocols.

PassivePOE should be considered as just a way to power the controllers, however due to the use of a 1.5A switching regulator on some devices like the uDCG-P2, PassivePOE can be used to power up to 25 Pixels to provide point of load control and power, very usefull for things like candy canes and other small Pixel count items.

Cheers
Phil


Reply
Page 4 / 4
Share: