Finally got em fini...
 
Notifications
Clear all

Finally got em finished.

162 Posts
38 Users
0 Reactions
54.4 K Views
Posts: 1744
(@tjetzer)
Noble Member
Joined: 18 years ago
arw01 wrote:Love these picicles, gotta have some, gotta. From putting things into and out of my cart on Todd's site, it looks like the plan is to use a 3 conductor T for the power injection. Which I am thinking you would have to run another set of wires and connectors to get into the T with, so perhaps your 4 conductor might be better long term because you can run power on two lines and maybe not need power injection?

So have you tried power on two of the wires and did it get you much further runs? Perhaps with the 4 and being able to inject power on both ends using two wires?

You shouldn't add an additional +v wire without adding an additional ground. Depending on how many icicles you're using you'd still have to inject power.


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

Don't be shy about injecting power. This is one place where you don't want to be caught short. It doesn't pay to short change the power.


Reply
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 20 years ago

I agree, I'm putting power into every sixth Icicle from a parallel harness. I looked but couldn't find the T style Craig used, so I made my own.

Jeff


Reply
Posts: 2229
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 20 years ago

I sure wish I would've asked that before I sent the request for a quote and paid Ray for the order... 🙂

Jeff


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago
Jeff Millard wrote:I sure wish I would've asked that before I sent the request for a quote and paid Ray for the order... 🙂

Jeff

LOL! Well I did say I would answer any questions.. :spox:

BTW, need any outdoor power supplies? I ran into a Buttload of them. 24v out at 10 amps. These are what I used to drive my DC-DC converters for the Plasma Icicles. They work great. The ones I have are UL recognized and true IP66.


Reply
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 20 years ago

No thank you. The run is 42'. Using a 450W 5V power supply placed in the middle and taking a DC tap out every 60 pixels I get bright white throughout. This was only tested with 60 Icicles (600 pixels) so far but I'm pretty confident I can get by without converting from a higher voltage. Still waiting on the slow boat from Ray Wu for the rest of the parts.

Jeff


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

If you use heavy enough wire and the distance isn't too far you should be fine. The number of injection points you have will help immensely.


Reply
Posts: 322
(@rklarman)
Reputable Member
Joined: 18 years ago

Are the plasma ws2812 icicles 5v or 12v ?

Sent from my iPhone using Tapatalk


Reply
Posts: 2229
Topic starter
(@plasmadrive)
Famed Member
Joined: 15 years ago

They are 5v


Reply
Page 6 / 17
Share: