There is no visual indication on the receiver board that it is receiving data.
When troubleshooting you want to do as much as you can to eliminate unknowns.
Using different cords/receiver boards/output ports/power supplies and pixels are all things you can do to try to problem solve.
I would start off with your new receiver board with a short string of pixels you know works connected to your F48. This should rule out the chip on the receiver board.
There are only so many variables in this scenario so I would start replacing or swapping them out to see where the problem lies.
FYI - The receiver boards must've gotten hit by a surge or something. I swapped them out and all is well now.
wilkija wrote:FYI - The receiver boards must've gotten hit by a surge or something. I swapped them out and all is well now.
You can try replacing the chips, one is the differential receiver and the other is a driver.
