Notifications
Clear all

Failure rate?

21 Posts
16 Users
0 Reactions
6,910 Views
Posts: 326
Topic starter
(@robertb)
Reputable Member
Joined: 17 years ago
[#35175]

Going to keep this wide open. Smart or Dumb.

I am actually going to ask about dumb strips. I have some dumb nodes (bullet types) from Ray that I am very please with how long they have gone. Just have a couple that have gone bad but not completely out.

Have some dumb strips that I have changed out from a IP65 strip to a IP68 strip. Still have several that have had different colors go out in them.
These have been up since mid oct. in the hot GA sun.

Is this common? Do you find different vendors have different qualities? Not really wanting to name names here please. I mentioned "Ray" as a positive. I have had a couple of pig tails from Ray that have not been good. So I am sure from all vendors this might be the same. So please be general in your description. If you want to PM, I would love to hear from you.

Your experiences????
Robert


20 Replies
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago

In this year's show I have 34 dumb rectangles -- 16 have been out for three seasons, four more for two seasons and the remaining 14 for just this season. Knock on Formica, none have had problems.

I have 220 smart pixels -- second year for 124 of them. Two pixels were DOA last season and cut them out before mounting them; one pixel from this season's new batch went "always green" about five days into the show and I haven't decided whether I'm going to fix it in place or just wait until next year.

HTH.

\dmc

\dmc


Reply
Posts: 109
(@max-paul)
Estimable Member
Joined: 14 years ago

I bought some WS2811 12V strips in the spring of 2013. During the display that winter I lost several of the individual 3" sections. I found a group of guys talking that had the same problem. Seems that who ever made the strips that Ray Wu was selling did a poor job of selecting a resistor value for the Red LEDs. That was the majority of the failures. But I think that there were a few blue LEDs out also.


Reply
MindTrik
Posts: 1542
(@mindtrik)
Noble Member
Joined: 16 years ago

2014 pixel failures

700 Technicolors V2 = 3 failures, 3 have a blue glow, but work and pass data. 1st year from Ray

500 Pixabulbs = around 4 failures, 6 that lost a color. 1st year from DIYLEDEXPRESS

500 square resin filled = 4 failures, these are on their 3rd year from Ray

24 rectangle resin filled = 0 failures, 1st year from Holiday Coro

60 GECE icicles=0 failures. 1st year


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago
MindTrik wrote:2014 pixel failures

700 Technicolors V2 = 3 failures, 3 have a blue glow, but work and pass data. 1st year from Ray

500 Pixabulbs = around 4 failures, 6 that lost a color. 1st year from DIYLEDEXPRESS

500 square resin filled = 4 failures, these are on their 3rd year from Ray

24 rectangle resin filled = 0 failures, 1st year from Holiday Coro

60 GECE icicles=0 failures. 1st year

I know everyone would like to see zero failures....but I like those numbers!
Just out of curiosity, why would you switch from the square resin filled? they would be 1/2 the price of the TC and PB....and you seem to have had good luck with them. Is it just because the TC and PB look like a C7/C9? Isn't there a cover for the square ones as well?


Reply
Page 1 / 5
Share: