if it was a problem with the dataline then the pixel would be off and probably be flickering intermittently.
sounds like a voltage problem to me
I have setup modded RBL's with a 10' extension from Ray between each one - works fine...I need to power inject a little more frequently with these as I start to see white turn pinkish...injection fixes that.
I'm using 18ga, stranded single core wire to connect data between pixels. I have 14 runs between 7' and 10' without any issues.
MrDudeMan wrote:if it was a problem with the dataline then the pixel would be off and probably be flickering intermittently.
sounds like a voltage problem to me
That's what I thought as well. So I replaced the extension cable and resoldered. Same problem. Maybe it is the pixel. I will have to try some others.
dcamron wrote:I'm using 18ga, stranded single core wire to connect data between pixels. I have 14 runs between 7' and 10' without any issues.
Yes, I bought 18awg 3 conductor stranded cable. Tried a couple of different pieces. I am glad to hear others are having success extending the distance between pixels.
What voltage pixels are they? What voltage are you measuring at the extension? How many pixels are in the star? 2' - 5' 18AWG should not cause a problem like this.
