Fusing 5 volt Pixel...
 
Notifications
Clear all

Fusing 5 volt Pixel Strings

8 Posts
6 Users
0 Reactions
2,595 Views
Posts: 39
Topic starter
(@gomer23)
Trusted Member
Joined: 9 years ago
[#47074]

I was curious if anyone uses a fuse on their 5 volt pixels? I was thinking about doing this on my power injection lines but I didn't immediately find 5 volt fuses. Does anyone use fuses for these? or use some other sort of protection if there was a short in the string?


7 Replies
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

You should definitely use fuses on any power injection. The fuses we use are rated primarily in amps, not volts. Look for some 5 amp fuses at your local Auto Supply store if you need them right away. If you want the cheapest that may take a while, look on eBay.


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Need to check this out. Post #19 has the prices.
http://www.doityourselfchristmas.com/forums/showthread.php?t=48620


Reply
Posts: 7
(@adi32k)
Active Member
Joined: 10 years ago

Wire and fuses can handle a given max current, pretty much regardless of voltage. A 10A fuse will blow if you exceed 10A, if the voltage is 5V or 500V.

You should use fuses on all lines. One 5v pixel consumes max 60mA so for a regular string lenght of 50-70 pixels use a 5A fuse.

Sent from my iPad using Tapatalk


Reply
Posts: 7
(@adi32k)
Active Member
Joined: 10 years ago

Or use boards like this that are easy to use.

https://www.pixelcontroller.com/store/index.php?id_product=46&controller=product

Sent from my iPad using Tapatalk


Reply
Page 1 / 2
Share: