ESPixelStick - E1.3...
 
Notifications
Clear all

ESPixelStick - E1.31 WiFi Pixel Controller

948 Posts
178 Users
0 Reactions
503.7 K Views
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
sporadic wrote:Sold out pending payments and all invoices have been sent. Will update if anymore become available. Thanks!
-shelby

Looks like I failed at counting... I have 10 more kits left, can grab them here - https://goo.gl/forms/GzoVxmZE4NsRudRE3 .
thanks,
-shelby


Reply
Posts: 1387
 kev
(@kev)
Noble Member
Joined: 12 years ago
sporadic wrote:..... the ESP-01 module which is around $3.50......

Is there an ESP-01 module that you prefer? Or one that you stay away from? Or are they all pretty much the same? Preferred vendor?

Thanks,

Kevin


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

ESP-01 with the black PCB has the extra memory needed to support the OTA function. Stay away from the units with a Blue PCB they have a smaller memory device on them. Not sure you can even get the ones with a Blue PCB but look out for it any way.


Reply
Posts: 17
(@comicrcc)
Active Member
Joined: 12 years ago

Without looking thru all posts what is the max # universes that can be run safely?
Thanks


Reply
Posts: 17
(@comicrcc)
Active Member
Joined: 12 years ago

I am trying to run a mid sized tree with 12 strings of 50 pixels wireless with the smallest # of controllers. Any ideas? Thanks


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
comicrcc wrote:I am trying to run a mid sized tree with 12 strings of 50 pixels wireless with the smallest # of controllers. Any ideas? Thanks

Look here https://www.amazon.com/ESPixelStick-Wireless-DMX-Pixel-Controller/dp/B072XT1V77/ref=sr_1_1?ie=UTF8&qid=1503086171&sr=8-1&keywords=ESPixelStick


Reply
Kev7274
Posts: 2037
(@kev7274)
Famed Member
Joined: 13 years ago

Supports up to 680 WS2811 or WS2812 Pixels - 4 Universes of DMX data

comicrcc wrote:Without looking thru all posts what is the max # universes that can be run safely?
Thanks

Reply
sporadic
Posts: 1199
Topic starter
(@sporadic)
Noble Member
Joined: 14 years ago
kev wrote:Is there an ESP-01 module that you prefer? Or one that you stay away from? Or are they all pretty much the same? Preferred vendor?

Thanks,

Kevin

I have them sourced from AI-Thinker who is the OEM for the various ESP-XX formats. You should do fine with any ESP-01 though, as long as it has 1MB flash. This is what Marin was referring above. There are old versions on blue boards that have 512KB flash, but you shouldn't be able to find them new anymore.

comicrcc wrote:Without looking thru all posts what is the max # universes that can be run safely?
Thanks

Depends on what refresh rate you want to run really. 4 universes / 680 pixels is a nice safe number for 25ms refresh rates. The most I've heard someone running off one is around 1k, but you'd have to run at a 50ms show rate. 4 Univeres / 680 pixels is the "advertised" number.


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago
sporadic wrote:Sold out pending payments and all invoices have been sent. Will update if anymore become available. Thanks!
-shelby

This is what happens when I dont get on the forums very often. lol I'll just have to buy more through amazon


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

Just now getting around to loading firmware on my last batch of EXPIXELSTICKS and I have a problem with one.
No power to it at all. I tried swapping out the ESP module, checked fuse and reflowed all components but nothing.
I metered + and - and getting 4.97v in, across C1 I am getting 4.97v, but when I meter U3 I am getting nothing.


Reply
Page 67 / 95
Share: